GM Tech-2
(CANdi & TIS)
Description:
The Tech-2 is the same tester GM Technicians use to diagnose GM
vehicles. The Vetronix Tech 2 comes with Authentic GM software and
provides support for on-board diagnostics on all GM systems 1992 thru 2007
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive
diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool
obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your
Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later
review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional
control when performing power train, chassis, and body diagnostics.
Vetronix Tech 2 Specifications
Dimensions: 12??
Microprocessor: 32 bit, 16 MHz
Memory: 32 MB flash type II PCMCIA. Type III slot available for future
expansion.
Communications: Integral RS232 communication port.
Screen: 3.8?.8 backlit monochrome with full graphics capability: 320?40
pixels. Displays up to 9 vehicle parameters at once
GM aftermarket Expertec TIS software on CD-ROM disks
Hardware lock to open SPS programming in TIS 2000
RS232 cable and user's manual.
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Tech-2 Users Manual download ( 3.9 Mb )
Tech-2 Flash Registration Card
An industry change in protocol from OBD II to Controller Area Network (CAN)
has begun. In order to perform diagnostics on a vehicle that uses the CAN
interface; you will need the Tech 2 Flash and a CAN diagnostic interface
module. The module connects between the Tech 2 Flashs diagnostic link
cable and the OBD adapter. Once the module is connected, it can be used
on all GM vehicle applications, even those vehicles using other platforms
such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)
Main Products: 
Facebook
X
Pinterest
Linkedln