Preparation
Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust.
Application
Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Guoqiang Hard Wax Oil is formulated for application directly, and does not require thinning.
First Coat : Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply thinly using a good quality bristle or synthetic brush and lay evenly, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight.
Second Coat : Apply as first coat, thinly, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. When the surface area is completely dry, a light buff will further enhance the sheen level.