Fluorine Products Dryer, buy Industrial vacuum drying oven for fluorine products dryer , 380V 50Hz 1200 capacity on China Suppliers Mobile

Product Details

Certification:ISO9001
Quick Details

Place of Origin:	CHANGHZOU China (Mainland)	Brand Name:	CHUANGXIN	Model Number:	HD-708-1
Power:	Electronic	Usage:	drying oven	certificate:	CE, SGS, ISO .
The rated power:	Three phase four wire, 380 v, 50 hz	The highest working temperature:	300°C	Heating zones:	1 zone
Drying oven door way:	Manually turn	control precision control precision:	control precision	Heating power:	24 kw
Outer furnace wall temperature:	35 °C or less	capacity:	1200

Application:

drying oven is suitable for electronic, petroleum, mining, medicine, machinery manufacturing, etc. Products of drum wind drying and heat treatment. vacuum drying oven is safe, energy saving, thermal insulation performance is good, the industrial drying oven temperature uniformity is good, simple installation, convenient maintenance, etc.

Structure:

1.1 vacuum drying oven adopts monolithic, thermal insulation layer is made of high quality mineral wool, shell, hot air circulation device, electric control cabinet on the right side of the vacuum drying oven is convenient for operation, drying cabinet equipped with new air in and out of port, the cabinet ventilation duct and hot air circulation fan, drying the casing.

1.2 Case material: body skeleton adopts 40 x 40 mm Angle steel welded together, enclosure wall material is 0.8 mm thick stainless steel plate; Wind layer is made of thick 1 (SPCC) cold rolling steel plate, the outer wall material is 1 mm cold rolled high carbon steel, body surface coating light gray paint.

1.3 Thermal insulation material: high quality mineral wool, the thickness of the insulation layer design requirements to ensure that the oven in the rated operating temperature range, casing outer wall temperature at room temperature + 25 °C or less; > 100 mm insulation layer thickness of insulating layer at the bottom of the oven about 80 mm.

1.4 Door sealing strip:High temperature resistant asbestos rope seal

1.5 The door is:Design to open the door and the door is manual flat open, the door is steel structure steel and precision of high qualified steel plate assembly welding and into.

1.6 The door is sealed:USES the manual of the rod handle and the door is the soft edge sealing device, pressure can make the door and enclosure, make sure remain the state of closed box in the process of production, to eliminate the hot gases to escape, improved working environment, guarantee the box temperature uniformity and enhance energy saving effect.

1.7 The wind but I:Wind but made of 0.8 mm thick stainless steel plate surface blunt D13 holes, is used to control the air flow, to improve the drying oven temperature uniformity.

Product Main specifications:

Equipment model	industrial drying oven
Drying oven work size	Deep 960 (L) x width1760 (W) x 1420 mm (H)
Drying oven outside diameter size	Deep 1200 (L) x width 2200(W) x 1860 mm (H)
The rated power	Three phase four wire, 380 v, 50 hz
The highest working temperature	300°C
Using the temperature	Room temperature + 10 ~ 300 °C can be arbitrarily set
Heating zones	1 zone
Heating element connection	Y
Heating power	24 kw
The temperature control mode	Using digital intelligent microcomputer PLD temperature control system.
Temperature control precision	±1°C
Outer furnace wall temperature	Temperature 35 °C or less
Drying oven door way	Manually turn
Hot air circulation fan