Measure the signals of automotive sensors
 
 
·
 Allow simulation of most sensorand computer management components
 
 
·
 check basic ECU operation
 
·
 Eliminate unnecessary replacement of non-defective sensors
 

 

    Features
 
Measure the signals of automotive sensors
 
    
 ·
 The most complete hand held diagnostic tester for sensors,wiring,connectors
 
and on-board computers
 
DC voltage,lambda,frequency and pulse signals can be measured
 
·
 Digital display shows actual output of signals
 
·
 Measures any voltage AC or DC,resistance or frequency output
 
Allows Simulation of most Sensor and computer managemeng omponents
 
 
 ·
 Simulating temperature sensors,throttle potentiometers,switches,air
 
 
 
 flow meters and lembda/oxygen srnsors
 
 
 ·
 Features AC voltage output to simulate vehicle speed sensors(vss),
 
 
 
 CAM,CRANK,and ignition reluctors
 
 
 ·
 Simulates actual working condition of any sensor without having to remove it
 
 
 
 from the vehicleA.B.S.,Crank,Can,Coolant,Oxygen,MAP,MAF,MAT,VSS,etc
 
Cheeks basic ECU operation
 
 
 ·
 Controlling the signals being produced allows you to check ECU response and
 
 
 
 operation.This prevents mis-diagnosis where the fault may lie in the ECU itself
 
 
 
 or in the wiring between the component and the ECU.Works independently or with
 
 
 
 any scan tool ever made
 
Can be used on any domestic or import vehicle
 
Eliminates unnecessary replacement of non-defective sensors
 
Can drive computer into"open or closed loop."

  SPECIFCATIONS
 
Simulate Signal
 Range
 Function
 
DC Voltage      
 0-1V
 Simulating lambda/oxygen sensors
 
0-5V
 Simulating DC signal of sensors
 
0-12V
 
Resistance
 0-5K
 Simulating temperature or resistance sensors
 
0-200K
 
Frequency SignalV/Duty/Hz
 0-5v 10-90% 10-4KHz
 Simulating frequency signal sensors
 
0-12V 10-90% 10-4KHz
 
  
 
Test Function
 Range
 Basic Accuracy
 
DC Voltage
 400mV,4v ,40v,400v,1000v
 ±(0.5%+3d)
 
AC Voltage
 400mV,4v ,40v,400v,750v
 ±(0.8%+3d)
 
DC Current
 40mA,400mA,10A
 ±(1.2%+3d)
 
AC Current
 40mA,400mA,10A
 ±(1.5%+3d)
 
Resistance(Ω)
 400,4K,40K,400K,4M,40M
 ±(1.0%+3d)
 
Capacitance
 40nF,400nF,4μF,40μF,100μF
 ±(5.0%+3d)
 
Frequency
 10Hz-10MHz
 ±(0.5%+3d)
 
Duty cycle
 0.1%-99.9%
 ±(2.0%+3d)
 
Diode test and Audible Continuity test
 
 Test current:1±0.6mA
 
 
 >60Ω Buzzer sounds