Delivery Time:5-7 working days
Certification:ISO 9001
Efficient Cement based Mortar Concrete Waterproofing white Agent
YunYan efficient mortar is a new and effective mortar plasticizer, it can make the mortar mixing easy and become soft, smooth construction, improve work efficiency and construction schedule.
Product features
1. This product can replace all lime putty, and output of mortar increase 10%-20%, so the economic benefit is remarkable.
2. It plays a good dispersion dissolve performance in the mortar, can be mixed directly, and easy to stir well than lime putty, reduce the cost of labor.
3. Non-toxic, green environmental protection, won\'t produce new compounds, mainly have adsorption, scattered, decrease water, foaming functions in the mortar.
4. This product is a micro bubble improved, with good decrease water performance, make mortar more soft and higher strength.
Scope of application
Apply to all kinds of industrial and civil architecture of the bonding mortar, plastering mortar.
It is applied in making concrete hollow bricks, hollow blocks, cement products.
Construction technology
Dosage: 0.5-1.2% of cement, usually every package of cement (100 kg) mixed with 1 kg.
Since it’s less usage, requirements extend mixing time, mechanical stirring is a better.
Hand mixing: with sand, cement, efficient mortar mix well, then adding water mixing 5 minutes again.
Mechanical agitation: with sand, cement, efficient mortar mix 1 minute, then adding water mixing 3-5 minutes.
Attentions
Before plastering, wall surface should be drenched by water, plaster when it is no obvious water.
When plastering, should be take on around 95% mortar to wall at first time, and make the wall to be level off and uniform; If put more than 20 mm thickness plastering, need to hierarchical construction.
When operating, we should take the leveler up or 45 degrees up, not pull down or 45 degrees down. After operating, use wooden floater to rub, then use iron trowel knife press the surface again.
Execute standard
JG/T164-2004
|
Testing Items |
Testing description |
Standard requirement and result |
|
Degree of stratification |
mm |
10-30 |
|
Air content |
Standard stirring % |
≤20 |
|
1h standing |
≥4 (air content on standard stirring |
|
|
Setting time deviation |
min |
+60～-60 |
|
Compressive strength ratio |
7d % |
≥75 |
|
Freezing resistance |
Loss ratio of compressive strength % |
≤25 |
|
Quality loss ratio % |
≤5 |
Storage period
Keep in cold and dry place, unopened product is valid for 1 year.
Spec.
25kg/bag
Office: Room 1709, Jingying Building, No.316 Huanshizhong road, Yuexiu district, Guangzhou.
Tel: 020-83550760 Fax: 020-22810051 Web:
Panyu factory: Guanqiao Industrial zone shilou Town Panyu District,Guangzhou.
Yunfu factory: Yunan Industrial zone Yunfu district, Guangdong.
Chongqing factory: Shapingbeige Leshan Industrial zone, Chongqing.
Changsha factory: Lituo Industrial zone, south high speed rail station, yuhua District, Changsha.
FOR OEM:
1. Brand Owner’s Authorization Letter is required to be issued & provided for the corresponding production and exportation;
2. Quality only based on the samples which the buyer provided or YUNYAN’s counter-sample confirmed by buyer.
In every case, the user alone is fully responsible for any consequences deriving from the use of the product.
3. OEM MOQ: at least 1*20 feet container per item/color.
4. Printery mold fee: USD250 for 3000 bags at least.
Package cost: USD0.40/bag
Printing lead time: 12-15days
