OFE-855TM Managed and Table-type  Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime.It offer two RJ-45 ports and one fiber port and one console interface.It could managed local equipment by console interface and also managed remote equipment by telnet . Besides, user can control the bandwidth rate  as N*64Kbps.-100M

 Hardware Function

1.Support 10Base-T, 100Base-TX, 100Base-FX

2.Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards

3.Up to2km distance on multi mode optical port and 120km distance on single mode optical port

4.High-performance auto-negotiation chips make sure the data transfer with higher

5.Up to 1912 bytes package forwarded and support Cisco ISL and VTP protocol

7.Support half/full duplex mode Auto-negotiate

8 . security and stability

9.Support hot-swap for all the modules, but not including management module

 10. FC/SC/ST optical port slectable and standalone

11.Support local and remote management

12.Support Console, WEB and SNMP management

13.Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version

14.View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status

15.Support remote loop back function, three loop back position selectable. Help to find out the line fault conveniently  

16.ummarize the data flow information and show the communication state of each portSupport SNMP management. Set Trap Destination and Community Name, including the authority

17.Supporte firmware upgraded

18.Show the detailed information of power supply, including AC/DC type and running status

19.Provide MIB file, make it easy to be integrated into the third party SNMP management software

 20.Offer two RJ-45 ports and one fiber port,one console interface.

Specifications

Technical Reference 

1. Ethernet Interface:

  Standard: IEEE802.3 IEEE802.3U, IEEE802.3X

  Rate:force 10M bps, 100M pbs and auto negotiation 10/100M

  Full duplex and half duplex auto negotiative

  Connector: RJ-45

 2. Optical port:

   Wavelength:850nm and 1300nm multimode , 1310nm and 1550nm single mode

  Distance : up to 120 km

  Connector: ST/SC/FC Optional

3.  Size

Standalone: 191mm *110*25H MM

4. Operating Temperature : 0-50oC

    Storage Temerature : -- 40--70 oC

    Humidity : 5%--90%

5 .Power

 AC: 110-240v   , 50/60Hz ;DC 48V optional .

onsumption: Standalone < 3W