Delivery Time:20-25 working days after receiving advance payment
Certification:CE

CNC Precision Automatic Winding Machine Auto Coil Winding Machine

Description:

The machine can tie and twist the cable automatic.The Head length,Total winding length can be adjusted.

Parameter :

Model of machine	SD-168B(AC)	Winding speed	1100-1300pcs/h
Total winding machine	120-220mm	Length of the wire	MAX.4000mm
Normal head length	0-100mm	Nomal tail length	30-350mm
Length of cable tie	can be adjusted	Voltage	AC220V/50Hz
Number of turns for tie	can be adjusted	Pressure of air source	0.5-0.8MPa
Dimension	1300mm*660mm*1550mm	Weight	235KG

PRE-OPERATION PREPARATION

 
1, Add appropriate lubricating oil to each oil feeding part
 

2, Whether the air pressure exceeds 4.5KG/cm2

3, Whether the wire reel is in proper position

4, after the machine is started, see if the motor or other mechanical components sound abnormally
 

Operation Steps:

1, placement of wire: place the plug end of the wire into the wire reel locating block and press starting switch to enable the wire to be processed in each link by attaching to the winding rod until the wire binding is completed
 

2, adjustment of the wire length: loose the adjusting holder and adjust the wire to the desired length to the left and right, and then tighten the screw
 

3, Adjustment of wire allowance at the other end: loose the air cylinder base to enable the cylinder to stretch out, and then move the air cylinder base to get the desired length of the wire at the other end, and then tighten the screw.

PRODUCT SHOW: