Programming Logic Controller, buy Automation System 14DI / 10DO Relay PLC Logic Controller with two RS485 ports UN214-1BD23-0XB0 on China Suppliers Mobile

Product Details

Delivery Time:As soon as payment confirmed
Certification:CE

Automation System 14DI / 10DO Relay Programming Logic Controller with two RS485 ports

Quick description :

1). 14DI, 10 DO with relay

2). Communication Ports: 2RS - 485, both support PPI protocol ;

3). Supports expansion modules : 7 modules ;

4). Compatible with Siemens 224 CPU ;

5). 3- year warranty ;

6). Siemens software is ok.

Detail description :

Technical specifications
Model	CPU224 AC/DC/Relay
Physical characteristic
Dimensions(W x H x D)(mm)	120.5×80×62
Power consume	10W
Memory
Program memory size
With run mode edit	20K bytes
Without run mode edit	20K bytes
Data memory	10K
I/O
Local digital inputs	14 inputs
Local digital outputs	10 outputs
Digital I/O image size	256(128 inputs /128 outputs)
Analog I/O image size	64(32 inputs / 32 outputs)
expansion modules allowed (Max)	7 modules
intelligent modules allowed (Max)	7 modules
Pulse catch inputs	14
High-speed counters	6 counters total
Single phase	6 at 30KHz
General
Timer	Total number: 256 (1ms:4;10ms:16;100ms:236)
Counters	256
Internal memory bits stored on power down	256
Time interrupts	2 with1ms resolution
Edge interrupts	4 up and / or 4 down
Analog adjustment	2 with 8 bit resolution
Boolean execution speed	0.08µs per instruction
Real Time Clock	Built-in
Communications Built-in
Ports	2 RS-485 ports, within1standard PPI port
PPI Baud Rates	9.6,19.2 and 187.5 kbaud
Freeport Baud Rates	1.2kbaud to 115.2kbps
Max. cable length per segment	With isolated repeater:1000 m up to 187.5kbaud, 1200 m up to 38.4kbaud Without isolated repeater: 50 m
Max. number of stations	32 per segment, 126 per network
Max. number of masters	32
Peer to peer(PPI Master Mode)	No
Power
Input voltage	85 to 264 V AC(47 to 63Hz)
Input current	60/30mA while CPU only at 120/240V AC
200/100Ma while Max. load at 120/240V AC
Inrush current	20A at 264 V AC
Isolation(field to logic)	1500 V AC
Hold up time(loss of power)	1s at 120/240 V AC
Sensor voltage	20.4 to 28.8 V DC
Current limit	1.5A peak, thermal limit non-destructive
Ripple noise (sensor to logic)	Less than 1V peak-to-peak
Isolation (sensor to logic)	Not isolated
CPU Digital Input Specifications
Built-in digital input	14 inputs
Input type	PNP/NPN
Rated voltage	24 V DC at 4mA
Max. continuous permissible voltage	30V DC
Surge voltage	35 V DC,0.5s
Logic “1” voltage range	15 to 30 V DC
Logic “0” voltage range	0 to 5 V DC
Input delay	Selectable (0.2 to 12.8ms)
Isolation (field to logic)	Yes
Optical galvanic	500 V AC for 1minute
Isolation groups	Refer to Wiring diagram
HSC logic level 1(15 TO 30 VDC)	20K Hz (Single phase), 10K Hz (Tow phase)
HSC logic level 1(15 TO 26 VDC)	30K Hz (Single phase), 20K Hz (Tow phase),
Inputs on simultaneously	all