Item | Type | JX-760 | |||
A | B | C | |||
INJECTION UNIT | Screw diameter | mm | 32 | 34 | 36 |
Screw length/diameter ratio | 22.3 | 21 | 19.8 | ||
Shot size(theoretical) | cm3 | 115 | 130 | 145 | |
Injection weight | g | 100 | 115 | 130 | |
Injection rate | g/s | 85 | 97 | 100 | |
Plasticizing capacity | g/s | 10.6 | 12 | 14 | |
Injection pressure | Mpa | 170 | 152 | 145 | |
Screw speed | rpm | 0-200 | |||
CLAMPING UNIT | Clamp tonnage | kN | 760 | ||
Toggle Stroke | mm | 270 | |||
Space between tie-bars | mm | 320X300 | |||
Max.mould height | mm | 325 | |||
Min.mould height | mm | 150 | |||
Ejector stroke | mm | 65 | |||
Ejector tonage | kN | 22 | |||
Ejector number | 1 | ||||
OTHERS | Max.pump pressure | MPa | 16 | ||
Pump motor power | kW | 7.5 | |||
Heater power | kW | 5 | |||
Machine dimensions(LxWxH) | m | 3.5X1.2X1.6 | |||
Weight | t | 2.2 | |||
Feeding Size | kg | 15 | |||
Oil box Size | l | 160 |
Standard sets:
multilevel pressure and speed ejector adjust, pressure adjust set, high speed close mold, low pressure protect, multi-quake ejector, machine and electron safe sets, lubrication system, oil-pressure scale control, computer control, mold remember system. Our company is able to replace multi-capacity molding computer of standard sets control part to program control or relay figure control.
Standard equipment:
Spare equipment, mold pressure board