Thedimensions on the drawings are the final dimensions after the hot dipgalvanization. The design of the fittings is indicative; however the mentioneddimensions on the drawings are the critical ones.

Pole line hardware GALVANIZATION

Thefittings shall be delivered hot dip galvanized according to the followingspecifications:

·        The Zinc of the pole line hardware  that shall be used shall have the quality ofminimum category prime western according to the category Zn 98.5 according to ISO-1461.

·        Then washed out withwater and then flux treated and dried out.

·        The hot dip galvanizationshall be made in a Zinc bath of temperature 450°C and of Zn-composition min.98,5%.

·        The galvanizationthickness of the pole line hardware shall be in average 80mthick! On an isolated piece or on a small part of the surface the thickness canbe a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μmand the average weight in relation to the galvanized area shall be 610 gr/m².