3mm bluish green 505nm high brightness light emitting diodes / infrared led emitter
USD $ 0.01 ( - $ 0.01 ( /Piece
Min.Order:1 Piece
HongKong Double Light Electronics Technology Co. Ltd
High efficiency DIP 3mm Super Red high power light emitting diode 625 - 640nm
570 - 575nm light Indicator LED diffused green light emitting diode
590nm 1W Yellow high power led chip AllnGaP Chip Water clear
Water Clear Dip 3mm Round high power light emitting diode 850nm for Camera
Yellow Diffused 0.55mm Height Top View White Rgb SMD LED Chip InGaN
1.10mm Height 1210 Package Dual Colour Led Multi Color Chip GaP Material
3mm bluish green 505nm high brightness light emitting diodes / infrared led emitter
Features: Choice of various color. Available on tape and reel. Reliable and robust. The product itself will remain within RoHS compliant Version. Descriptions: The series is specially designed for applications requiring higher brightness The LED lamps are available with different colors, intensities. Applications: TV set. Monitor. Telephone. Computer. Circuit board. Status indicators. Commercial use. Advertising Signs. Back lighting.Part No. | Chip Material | Lens Color | Source Color |
DL-304BGCA-2BG30 | GaAlAs | Bluish Green | Bluish Green |
Notes:
All dimensions are in millimeters (inches). Tolerance is ± 0.25 mm (.010″) unless otherwise noted. Protruded resin under flange is 1.00 mm (.04″) max. Specifications are subject to change without notice. Absolute Maximum Ratings at Ta=25℃Parameters | Symbol | Max. | Unit |
Power Dissipation | PD | 120 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
Forward Current | IF | 30 | mA |
Reverse Voltage | VR | 5 | V |
Operating Temperature Range | Topr | -40℃ to +85℃ | |
Storage Temperature Range | Tstg | -40℃ to +100℃ | |
Lead Soldering Temperature [4mm (.157″) From Body] |
Tsld | 260℃ for 5 Seconds |
Electrical Optical Characteristics at Ta=25℃
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Luminous Intensity * | IV | 4000 | 6000 | --- | mcd | IF=20mA (Note 1) |
Viewing Angle * | 2θ1/2 | --- | 30 | --- | Deg | IF=20mA (Note 2) |
Peak Emission Wavelength | λp | --- | 500 | --- | nm | IF=20mA |
Dominant Wavelength | λd | --- | 505 | --- | nm | IF=20mA (Note 3) |
Spectral Line Half-Width | △λ | --- | 30 | --- | nm | IF=20mA |
Forward Voltage | VF | 3.00 | 3.30 | --- | V | IF=20mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
Luminous Intensity Measurement allowance is ± 10%. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Typical Electrical / Optical Characteristics Curves(25℃ Ambient Temperature Unless Otherwise Noted)
Reliability Test Items And Conditions:The reliability of products shall be satisfied with items listed below:
Confidence level: 90%. LTPD: 10%.
Test Items and Results: