A multi-turn valve with a closing element that moves perpendicularly to the valve body seat and generally seals in a plane parallel to the direction of flow. This type of valves is suited both to throttling and general flow control.

Y-Pattern Globe Valve's specification is as follow:

Y-Pattern valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F30L/graphite. Ring joint gaskets are also available on request. The second design is the welded bonnet, with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal bonnet joint.
 The Y-Pattern valves are available in globe and check design configurations.

Gate Valve Design Construction and Specifications
Y-Pattern globe and check valves conform to ANSI B16.34.  Each is tested according to API598, and markings are per MSS SP-25.

Construction is as follows:
.Full Port
.Piston and ball check
.Spring available on request
.Loose solid disc
.Two piece self-aligning packing gland
.Integral back seat
.Outside Screw and Yoke(OS&Y)
.Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and  pressure seal bonnet
.Socket weld ends to ASME B16.11
.Screwed Ends(NPT) to ANSI/ASME B1.20.1