Snap-in  Aluminum Electrolytic Capacitor for Charging pile1  Features and advantages of productsSpecialized for charging pile Make charging pile start normal at low temperature and different elevation , make sure the output less than or equal to 0.1 %, stabilized voltage precision less than or equal to ±0.5%; stabilized current precision less than or equal to ±1%Guarantee 105℃, 3000hours, high reliability; (After the life test, the test values decreased 5%~8%) Guarantee product feature at the limit of low temperature( at the high and low temperature situation capacity attenuation decreased by about 25%, and the impedance change was reduced by about 30%) Low leakage current  low loss2  Main technical parameters:Temperature range: -40(-25)~+85℃Voltage range: 350~500VCapacitance range:47~1000uf   @20℃,120HzCapacitance tolerance: ±20%The maximum loss:  0.15  @20℃, 120HzHigh-temperature zero load characteristics:Capacitor kept in 85℃ environment for 1000hours, then tested in 20℃ environment and the test result should satisfy the requirements as below.Capacitor change rate (△C）≤ initial value±15%Loss value（tgδ）≤ initial specification value±150% Leakage current≤ initial specification value3  Usage:Low power dc charging pile , Monolithic dc charging pile , Split type dc charging pile , Charging poles , Charging pole ;   small leakage current Snap-in type  Capacitor , low temperature rise Capacitor for Charging pile,anti-thunder aluminum Capacitor for Charging piles,Normal start in low temperature environment Capacitor ,-40℃ Electrolytic Capacitors for Charging pile  4  Contact informationIf you want to know more about Screw Terminal Aluminum Capacitor for charging pile , please contact our sales manager Jack Fang :Email: fdf@bit-ok.com  jackfang12345@yahoo.comPhone: 86-13163150827Skype: jackfang2016@hotmail.comWhatsApp: 0086-13163150827