Electric Magnetic Lock, buy 5 years warrranty 12V 1200lbs Electric Magnetic Lock for double matel door, electromagnetic lock on China Suppliers Mobile

Product Details

Delivery Time:7 working days after received your payment
Certification:CE/ROHS/FCC/MA

5 years warrranty 12V 1200lbs Electric Magnetic Lock for double matel door, electromagnetic lock

Product Overview

An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate used for access control door locks.

By attaching this to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate, holding the access control door lock shut.

Unlike an electric strike access control door lock a magnetic lock has no interconnecting parts and is therefore not suitable for high security applications because it is possible to bypass the lock by disrupting the power supply.

The whole system includes electric lock,power suply,access controller,exit button,door bell or RFID cards.

Specification

Product Parameter	Parameter Description
Size	530L71W40H(mm)
Armature Plate Dimension	185L60W13H(mm)
Holding Force	500kg2(1200Lbs2)
Input Voltage	12 or 24VDC
Current	12V/600mA or 24V/300mA
signal output	No
Operating Temp	-10~+55℃(14-131F)
Humidity	0~90%(non-condensing)
Cover Finish	Anodized aluminum
Lock Finish	Zinc
Armature Plate Finish	Zinc
Weight	9KG

Feature

Installation type: hanging mounted/surface mounted Operating: fail-safe and locked when energized Unlocking way: unlock when power-off Door type: single door Suitable for wooden, metal, glass, stainless steel and fireproof doors Wiring: PC board mounted terminal block connections Bracket is optional, assembled on hollow door and glass doors Made more secure, lock body adopts two screws on each side Can be used with access control system, building intercom and fire No mechanical damage and no residual magnetism, strong tension, less electricity and long lifespan MA certified products of China / CE certification of EU. Built-in reverse current protection device (MOV). Shell is made of high-strength aluminum alloy, Anodized. Dual Voltage 12 or 24 VDC(optional).

Installation drawing

Product mounting bracket

Wiring

Trade show

Electromagnetic Lock Trouble and Shooting

Troubles

Cause

Shooting

Door cannot lock

1. Circuitry malfunction or low voltage.

2. The power supply wire is too thin and long to cause big decrease of voltage.

3. Power supply is broken to cause no voltage output.

4. The positive and negative wire of power supply is connected in reverse.

5. The electromagnetic lock no power input.

1. Check the connection, and measure the voltage to see if it is normal.

2. Modify or change the power supply wire into thicker one.

3. Check the power polarity and correct the connection.

4. Check to see if power supply or controller is correctly connected to NC.Make sure to see up the controller correctly.

No transform of indicator output with low holding force.

1. The mount plate and the electromagnetic lock face not in complete close.

2. The mount plate is fixed to tight, no room to move.

3. The electromagnetic lock and the mounting plate not at same level for case the door is deformed or moved.

4. The surface of mount plate or electromagnetic lock is not clear.

5. The power supply with lower power.

6. The power supply wire is too thin and long.

7. The electromagnetic lock is malfunction.

1. Check the face of mount plate or electromagnetic lock, if the face of plate is deformed to cause no complete close to the lock, please change the plate.

2. Check if the rubber gasket is put into the stick of plate, and adjusts the bolt of plates not too tight at least a little movable.

3. Adjust the mount plate and electromagnetic lock to be level at each other and close completely.

4. Clean the surface of lock and plate, if rusted to cause no working please change the part.

5. Use millimeter to check the voltage and current of electromagnetic lock to see if it is normal, or need repairing or changing power supply.

6. Change into high quality power supply wire, better no more the 20 meters.

7. Repair or change the electromagnetic lock.

Contact Supplier