Main Products: Silicon Steel Laminations ,EI Transformer Laminations ,Electric Motor Laminations
Non - oriented Silicon Steel Laminations Gray 0.5mm Cold Rolled for electric engine
Negotiable /Ton
Min.Order:1 Ton
Quick Details View All >
Jiangyin Chuangjia Electrical Appliance Co., Ltd.
Business Type: Trading CompanyMain Products: Silicon Steel Laminations ,EI Transformer Laminations ,Electric Motor Laminations
0.5 Mm Coated Silicon Steel Laminations Cold Rolled Non-Oriented Light Green
Instrument UI Lamination Cold Rolled , 0.23MM EI Transformer Lamination For Ballast
0.35 - 0.5 Mm Silicon Steel Laminations Surface Coated For Electromagnetic Switch
Electric Engine UI / EI Silicon Steel Laminations Gray 0.5MM Non - Oriented
Cold Rolled Silicon Steel Lamination , Surface Coated Electrical Steel Sheet Core
Oriented UI Lamination Types Cold Rolled Silicon Steel For Electrical Transformers
Product Details
AISI Non-oriented Cold Rolled Silicon Steel Lamination Gray 0.5mm for electric engine
Specifications:
|
1.Grade: W600 2.Thickness:0.5mm 3.Width:1200mm Parameters: 1.Iron Loss:4.409 W/Kg(f=50HZ B=1.5T) 2.Magnetic Flux Strength: 1.674T(f=50Hz,H=5000A/M) 3.Surface Insulation Resistance:300 Ω/mm2 4.Tensile Strength: Extended Length 36%(387MPa) 5.Lamination Factor:97% 6.Minimum number of Bends: 10 Times Applications: 1.Small relays 2.Pulse transformers 3.Generators 4.Motors 5.Transformers 6.Power distribution 7.Ballast 8.Instrument 9.Audio 10.Generators for steam turbine and water wheels Characteristics: 1.Low iron loss, high magnetic flux strength, comes up to the international advance standard 2.Slight thickness difference between the horizontal and the longitudinal direction, promsing the high lamination factor 3.Processing Performance: easily punched and cut, high dimensional accuracy 4.Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility |
Applicable to all kinds of transformer core
Feature:
1. Low iron loss, high magnetic flux strength, comes up to the international advance standard
2. Slight thickness difference between the horizontal and the longitudinal direction, promising the high lamination factor
3. Processing Performance: Easily punched and cut, high dimensional accuracy
4. Insulating Coating: Uniform color, good insulation, strong adhesive, high heat resistance, high putrescibility
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
Description:
EI Lamination is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI 28 to EI -240, and the model of EI lamination in non-standard sizes is from EI-36 to EI-360. the gap sizes of transformer lamination core can be customized. Three -phase EI lamination is made by the silicon steel strip. The model of three-phase EI lamination is from three-phase (20) to three phase (100), and the hole size is from Φ4.5 to Φ14, The gap sizes of transformer lamination core can be customized. UI lamination is made by the silicon steel strip.the model of UI lamination is from UI-30 to UI-100, and the hole size is from Φ 8 to Φ 14. The gap sizes of transformer lamination core can be customized.
Facebook
X
Pinterest
Linkedln