Cold Vulcanizing Solution Conveyor Belt Glue Quick Drying Temperature Resistance​
 

Production Application
 
 
CMX3000 is suitable for cohesion of rubber-rubber, rubber-metal, rubber-fabric & fabric-fabric.

It has superb performance to be used for repair of conveyor belt, cold splicing of conveyor ends, pulley

lagging ect. Same with SC2000.
 
ER-45 hardener is a kind of special rubber adhesive for splicing hardener, which can accelerate the
 
neoprene rubber, natural rubber, polyurethane adhesive splicing speed, improve the adhesive
 
temperature resistance and water resistance.
 
According to different adhesive, add 2% to 8% of the total adhesive, it is widely used in all kinds of
 
conveyor belt cold vulcanized adhesive.
 
 
Technical Parameters
 

 
 
Advantages
 
CMX3000 adhesive:
 

1. Working temperature: higher than 10°C

2. Humidity:less than 90%

3. After base adhesive and the hardener mixed, it should be used out within two hours.

4. In order to ensure the bonding quality, please test before use it.

5. Avoid contact with skin while using it.

 
6. Used combine with ER-45 hardener according to100:4 (1kg:40g)
 
ER-45 hardener:
 
1. Keep out of the sun, Water resistance, damp-proof, Seal, dry conditions in storage.
 
2. Construction site must maintain good ventilation
 

Usage
 

1. Surface treatment: Polish the conveyor belt or fabric with steel wire wheels uniformly, must not
 
                                     wounded with fabric;
 
2. Wash: Wash the surface with LPT360 cleaner carefully until without any dirt;
 
3. Drying: Natural drying or heating drying;
 
4. Mixture: Mixing the adhesive and ER-45 hardener by 100:4, and used up within two hours.
 
                   When you want to use, you can mix for use;
 
5. Coating Adhesive: Coating Adhesive need 3 times. Each coating should be thin and uniform,
 
                                     when the adhesive dry and not glue the hand, please coating the adhesive again.
 
6. Splice: After the last glue dry and not glue the hand, but good adhesive force, splice is ok.
 
                 When you splice, please notice the center line of the conveyor belt, two bonding surface
 
                 should be matched one time. After splice, beat it tightly from middle to around.
 
7. Seal process: Use CMX918 for processing of the joint. Polish and Brush Seams with the rubber
 
                            adhesive and natural drying. After mixing the rubber adhesive and hardener, use it in
 
                            the joint seams quickly and let it smooth.
 
FAQ
 
01) Q: Normal delivery time?

A: About 15 working days. If we have the store, the time will be shorter.

02) Q: Whether can visit your workshop to see how to process the machine?

A: No problems, you are always welcomed to visit us.

03) Can I be your agent in our area?

A: Yes. ComiX is looking for the agents all over the world. If you are interested , please feel free to contact
 
     us to negotiate the agency mattes in details.
 
04) Q: How to get more informaition?
 
A: Please visit or