Delivery Time:1 working day after received your payment
Certification:CE / ISO9001

Modbus Agreement 3KW Digital Servo Drive For Dyeing And Finishing Machinery

Description:

EP1C PLUS is the fifth generation of Maxsine servo drive. All EP1C Plus series servo drives are provided with a superior digital signal processor (DSP) which represents a high-speed performance of the control circuit loop. It is high-speed and high-precision servo drive which is widely used in industrial automatic field. There are 16 models in this series with power range from 0.1kw to 7.5kw.

Characteristics:

1. Speed response bandwidth is 1.2kHz. High response control based on the torque feed forward, can reduce the response delay and make position setting time optimal up to 1ms.

2. Set notch filter, which can greatly reduce the noise and vibration caused by mechanical resonance of the device, to achieve quick response action. There are 2 notch filters to set the frequency of 50~1500Hz, which can be done a deep adjustment.

3. EP1C Plus series servo standard analog is with common 12bit resolution. 16bit high accuracy analog is optional. Thus, this series can meet the requirements of both high accuracy analog and common accuracy analog.

4. 3 basic modes: position mode, velocity mode, torque mode.

5. Built-in automatic high-frequency resonance suppression.

6. Quick connector is available for easy installation and use.

​Specifications:

Model			TH30-B0S0
Input power supply			Three-phase AC 380V -15%～+10% 50/60Hz
Environment	Temperature		Operation:0℃～40℃ Storage:-40℃～50℃
	Humidity		Operation:40%～80%(non-condensing) Storage:93% or less(non-condensing)
	Atmospheric pressure		86kPa～106kPa
IP rating			IP20
Control of main circuit			vector control
Regeneration			Built-in/built-out
Feedback type			23bitINC/ABSencoder
Control modes			Position, Speed, Torque
Digital inputs			Five programmable input terminals (optical isolation)Function SRVON ,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear selection 1,electronic gear selection2,Position deviation clear,pulse input inhibition
Digital outputs			3 Programmable input terminals(Optical Isolation) Function:SRDY,alarm,Finish Orientation Output,Reach Speed,electro-magnetic brake,Torque restrictions
Encoder signal outputs			A,B,Z Differential output,Z signal open-collector output
Position		Input frequency	differential input:≤1000kHz(kpps), single-ended input:≤200kHz(kpps)
		Command modes	Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse
		Electronic gear ratio	1～32767/1～32767
Speed		Analog command input	-10V～+10V, Input impedance10kΩ
		Acceleration/deceleration command	Parameter setting
		Command source	Analog quantity
Torque		Analog command input	-10V～+10V,Input impedance 10kΩ
		Speed limit	Parameter setting
		Command source	Analog quantity
Monitor function			Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency,busbar voltage,internal temperature of module etc.
Protection function			Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main Power,Abnormal Encoder,out of tolerance etc.

Applications:

Computer numerical control machine tools	Dyeing And Finishing Machinery
Textile machinery	Cotton spinning equipment
Packaging machinery	Transparent film wrapping machine
Printing machinery	Flexo machine