Product Details

Delivery Time:30-45 work days
Certification:CE

PVC / ASA Two Layer Plastic Corrugated Roll Forming Machine For Corrosive Chemical Plants Roof Tile

Character:

PVC corrugated roof sheet is manufactured based on polyvinyl chloride resin. As its name indicates, it adopts PVC as the main raw material. On the basis of a scientific ratio, the main material is then supplemented with anti-UV agent and other chemical raw materials to provide the end product with optimized overall performance.

This economical class plastic roofing material has great color consistency, and is corrosion, fire, and weather resistant. As a kind of non-asbestos building materials, it is environmental friendly, and is available with bright colors.

Application:

Due to above advantages, PVC corrugated roof sheet offers a great material to construct the roofing system for chemical factories, warehouses, steel structure buildings, farmers markets, car sheds, balconies, and so on. They are also widely used in the flat-to-pitched roof renovation projects. This series of corrugated PVC sheet can also be utilized as wall panel for use in projects with thermal insulating requirements.

Product width	840mm,900mm,1130mm, 1200mm, 1300mm
Product thickness	1.5-3mm
Extruder type	80/156 & 50/30
Output capacity	390
Length of machine	26m

Machine list:

No.	Machine	Qty.
1	Screw loader for extruder	1set	Main tile extrusion line Ridge tile forming
2	SJZ80/156 conical twin-screw extruder(PVC)	1set
3	Vacuum loader and drying hopper	1set
4	SJ50/30 single screw extruder(ASA)	1set
5	Extrusion mould and distributor	1set
6	Calibration mould and trimming device	1set
7	Haul off unit	1set
8	Cutter	1set
9	Stacker	1set
10	Ridge tile Oven	1set
11	Ridge tile Forming machine	1set

12	Screw loader for SRL-Z300/600 Mixer	1set	Auxiliary equipment
13	SRL-Z300/600 Mixer unit	1set
14	PC400 Crusher	1set
15	SMP400 Pulverizer	1set

Work flow:
Mixer for bottom layer(PVC powder, CaCO3, CPE, PE-WAX, Stearic acid , Compound stabilizer ,ACR, paraffin)

Extrusion process: Conical twin-screw extruder for bottom layer-Single screw extruder for Surface layer(ASA)-Mould-surface embossing(Optional)-Forming machine-Haul-off-cutter-stacker –Main tile

Oven-Ridge tile machine and mould-1set Ridge tile

Crusher(waste material)-Pulverizer—Reuse again for extrusion line

Product installation method:
Metal supporting
Tool: screw,presser,Pressing cap,rubber ring,gasket