Delivery Time:2-3days
Certification:CE
VWIC3-4MFT-T1E1 Cisco Network Module 4-Port 3rd Gen Multiflex Trunk Voice/WAN Int
Cisco VWIC3-4MFT-T1E1
Cisco VWIC3-4MFT-T1E1 Description:
The Cisco Third-generation 1-, 2-port and 4-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC3s) support data and voice applications on the Cisco 1921, 1941 and 1941W (data only), and the Cisco 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E Integrated Services Routers. The Cisco MFT VWIC3 combines WAN-interface-card (WIC) and voice-interface-card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface because the Cisco MFT VWIC3 cards can be reused in packet voice applications.The Cisco MFT VWIC3 interface cards add improvements over the Cisco Second-generation 1- and 2-port T1/E1 Multiflex Voice/WAN Interface Cards (MFT VWIC2s). The Cisco 2- and 4-port MFT VWIC3s enable each port to be clocked from an independent clock source for data applications. Voice applications can now be clocked independently from data applications, with all ports for voice applications clocked from a single source. The Cisco MFT VWIC3s use the ECAN on the motherboard PVDM cards with up to 128ms echo-tail length for demanding network conditions. MFT VWIC3 cards support up to 2 channel groups per T1/E1 port for serial data applications. Refer to Table 3 for all configuration options offered with the MFT VWIC3 cards.
The Cisco MFT VWIC3 cards can be inserted into the EHWIC slot on the supported Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E and 3945E integrated services routers. The T1/E1 MFT VWIC3 cards support both T1 and E1, providing additional flexibility in configuring the Cisco MFT VWIC3s for supporting T1, fractional T1, E1, and fractional E1 for both voice and WAN applications. All MFT VWIC3 modules include the drop-and-insert multiplexing capability, which eliminates costly external third-party channel service units/data service units (CSUs/DSUs) and drop-and-insert multiplexers.
The Cisco MFT VWIC3 cards are offered in single-, dual- and quadruple-port versions, which can be used and then redeployed as network requirements change, thereby addressing several applications:
T1/E1 data: The Cisco 1-, 2- and 4-port T1/E1 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1, (including structured G.703 with G.704 framing), fractional E1, and E1structured G.703 applications. To simplify remote management, these MFT VWIC3 cards integrate a fully managed DSU/CSU for T1 deployments and a fully managed DSU for E1 deployments.
E1/G.703 data: The Cisco 1- and 2- port G.703 MFT VWIC3 versions act as a WIC, supporting T1, fractional T1, E1 (including structured G.703 with G.704 framing), fractional E1, and unstructured E1 (G.703) applications. To simplify remote management, the G.703 version includes a fully managed DSU. The G.703 versions also support all the capabilities on the T1/E1 versions.
T1/E1 packet voice: The Cisco 1-, 2- and 4-port T1/E1 MFT VWIC3 (voice and WAN) versions act as a VIC, supporting packet voice applications by providing T1, fractional T1, E1, and fractional E1 connections to private branch exchanges (PBXs) and central offices, thereby enabling new services and reducing voice and fax toll charges.
Mixed data and packet voice: The Cisco MFT VWIC3 interface cards can simultaneously support both data and voice, reducing the complexity and number of network components and facilitating a graceful migration to bandwidth-efficient packet voice.
Mixed data and packet voice with drop and insert: The Cisco MFT VWIC3 cards can be deployed as a T1/E1 drop-and-insert multiplexer with integrated DSUs/CSUs, reducing the complexity of the network and the cost of the central-office ports by efficiently combining time-division multiplexing (TDM) voice (PBX), IP voice, and data on the same trunks. Cisco 1900, 2900 and 3900 ISR routers support drop and insert between ports over a single MFT VWIC3 card and two ports over two different MFT VWIC3s.
.
Items Details:
Tel: +8618616582084
Fax:
You May Like
- OPC UA I/O System BL205 Coupler with Built-In Edge Computing for Smart Factories
- OPC UA Distributed IO System BL205 for Industry 4.0
- Ethernet/IP Distributed I/O Module 4CH AI 0-5V/0-10V Single-Ended Input for NX102 PLC
- 4CH Analog Input 4-20mA Ethernet/IP Distributed IO Module for ePAC PLC
- Ethernet/IP Distributed IO Module BL203 is Used in M221 PLC OEM ODM
- BLIIOT Intelligent Manufacturing Profinet Distributed I/O Modules Applied to S7-200SMART PLC
- 8CH Digital Input/Output PNP/NPN Profinet Distributed I/O Module for S7-1500 PLC
- Distributed I/O Module BL201 Supports Profinet for S7-1200 PLC OEM ODM
- 0-20mA 4CH Analog Input Modbus TCP Distributed I/O Module for DVP Series PLC
- OEM ODM Manufacturer Modbus TCP Distributed I/O Module BL200 for S7-1200 PLC
Popular Searches
Find Similar Products By Category
You May Like
- 16-Channel Digital Input/Output NPN/PNP Modbus TCP Distributed I/O Module BL200 for Codesys PLC
- PLC to OPC UA Industrial IoT Gateway
- PLC to MQTT Data Acquisition Gateway
- Modbus PLC to MQTT OPC UA Protocol Conversion Gateway
- PLC to OPC UA Protocol Converter
- Modbus PLC to OPC UA Industrial Gateway
- PLC to MQTT Industrial Protocol Converter
- PLC to MQTT Industrial IoT Gateway
- Modbus to MQTT Protocol Conversion Gateway
- Modbus to MQTT Protocol Converter
- Modbus TCP Master to MQTT Protocol Converter
- Modbus RTU to MQTT Industrial IoT Gateway
- Modbus to MQTT Industrial IoT Gateway
- NEO-M8U-04B
- SARA-R410M-02B