|
> General desciption |
|
Molded graphite materials we supplied are divided into two series: FS Series /FB Series . They have high anisotropy. The materials provide extremely wide characteristics such as mechanical strength, friction and conductivity, which can be further enhanced by impregnation with resins or metals. Special materials can be processed by pressing components directly close to final sizes. The press-to-size-technology reduces the cost of machining in large quantities.
| |
|
> Normal molded graphite materials |
|
> Description |
|
Normal molded graphite materials are divided into FS series and FB series. These series graphite materials are normal molded graphite materials. They have many good characteristics such as high strength, excellent thermal shock resistance to high temperature and oxidation, low specific electric resistance, good anticorrosion, ease of precise machining.
| |
|
> FS Series--Typical specifications,technical data and recommended applications |
|
Item |
Typical
Specifications
(mm) |
Bulk
Density
(g/cm3)
Min. |
Porosity
(%)
Max. |
Compressive
Strength
(MPa)
Min. |
Specific
Resistance
(μΩ.m)
Max. |
Ash
Content
(%)
Max. |
Recommended
Applications |
| FS-1 |
F330×220
F300×250 |
1.70 |
24 |
40 |
15 |
0.5 |
Electric discharge machining graphite, die casting moulds, coating for metal, Diamond sintering moulds, Hermetical material, and Moulds for continuous casting |
| FS-2 |
F330×250
780*210*120 |
1.75 |
22 |
55 |
15 |
0.5 |
| FS-3 |
F250×250
F150×250
F130×250
F100×250
400*130*100
420*120*80
400*200*100
420×140×45
300*150*105
280*280*110 |
1.77 |
21 |
58 |
15 |
0.5 |
| FS-4 |
300×205×105
280×280×110
150×150×230
120×120×380
F130×250 |
1.8 |
19 |
65 |
15 |
0.5 |
|
Note:
·The above data is the max. and min. data, the data actually measured will be better
·We can make especially according to your requirements in sizes and specifications. |
|
|
> FB Series(Fine-grained size high purity graphite material) |
|
> Description |
|
FB series graphite materials are purified for Ash Content. They not only have all the performance of normal molded graphite materials but also have low impurities.
|
|
|
> Typical specifications,technical data and recommended applications |
|
Item |
Typical
Specifications
(mm) |
Bulk
Density
(g/cm3)
Min. |
Porosity
(%)
Max. |
Compressive
Strength
(MPa)
Min. |
Specific
Resistance
(μΩ.m)
Max. |
Ash
Content
(%)
Max. |
Recommended
Applications |
| FB-1 |
F330×220
F300×250 |
1.70 |
24 |
40 |
15 |
0.005 |
Electric discharge machining graphite, die casting moulds, coating for metal, Diamond sintering moulds, Hermetical material, and Moulds for continuous casting |
| FB-2 |
F330×250
780*210*120 |
1.75 |
22 |
55 |
15 |
0.005 |
| FB-3 |
F250×250
F200×250
F150×250
F130×250
F100×250
200*200*50
400*130*100
420*140*45
300*150*105 |
1.77 |
21 |
58 |
15 |
0.005 |
| FB-4 |
300×205×105
280×280×110
150×150×230
120×120×380 |
1.82 |
18.5 |
68 |
15 |
0.005 |
| FB-5 |
780*210*120
650*200*135 |
1.8 |
19 |
65 |
15 |
0.005 |
|
Note:
·The above data is the max. and min. data, the data actually measured will be better
·We can make especially according to your requirements in sizes and specifications. | |
Main Products: Isostatic grpahite , molded graphite ,vibration graphite , graphite crucible , graphite block , graphite rod , graphite tube ,graphite sheet , graphite felt ,carbon felt , graphite mould ,CFC BOLT NUT PLATE ROD SHEET
Business Type: Trading Company
Beijing China
Facebook
X
Pinterest
Linkedln