Mini-pleat HEPAMini-pleat HEPA filters are mainly installed at the end of a 0.5μm clean room to control particulates of larger than 0.5μm in the clean room. Seals for mini-pleat HEPA filters: Dry & wet jointed EVA seal strips,Website: , dry & wet jointless PU seal strips and wet gel seals etc.Standard size & parametersModelOverall sizeL×W×D      Rated Air Flow (m3/h)Initial resistance (Pa)H13Dust holding(g)Efficiency(F6)1μm  ≥60%Efficiency (F8)1μm  ≥90%Efficiency (H10)0.5μm ≥85%Efficiency (H12）0.5μm  ≥99.5%Efficiency (H13)0.3μm  ≥99.95%Efficiency (H14)0.3μm  ≥99.995%WGB610.610-70*610×610×7010004060110160220     (190)250     (220)400WGB915.610-70*915×610×701500600WGB1220.610-70*1220×610×702000800WGB1170.570-70*1170×570×701800800WGB1170.870-70*1170×870×7027001200WGB1170.1170-70*1170×1170×7036001600WGB610.610-90*610×610×901250600WGB915.610-90*915×610×901850900WGB1220.610-90*1220×610×9025001200In the Table, values given in parentheses are the initial resistance of low-resistance mini-pleat air filters, the dust holding capacity (N/A in the Table) is slightly increased