Delivery Time:10 work days (According to the order quantity )
Certification:CE FCC
pure sine wave INVERTER 350w 12vvdc to 220vac 230vac 240vac pure sine wave inverter with charger
Model : HI-35112
Features:
64-bits DSP Intelligent control chipset
LCD display with multi-function
Built-in automatic AC charger and automatic AC mains switcher. Switch time <8ms
Super wide input voltage range, strong adaptation for the environment
Applicable for: ( Solar/Wind/Home System )
1. Travel set equipment
2. Industrial equipment
3. Office equipment
4. Kitchen equipment
5. Household electrical equipment
6. Power tools
| HI Series Wall-mounting Low Frequency Pure Sine Wave Inverter (220V) | |||||||||||
| Model | HI-351 | HI-501 | HI-601 | HIS-801 | HI-102 | HIS-122 | HI-152 | HI-202 | HI-302 | HI-502 | |
| Rated Power | 350W | 500W | 600W | 800W | 1KW | 1.2KW | 1.5KW | 2KW | 3KW | 5KW | |
| Peak Power | 700W | 1000W | 1200W | 1600W | 2KW | 2.4KW | 3KW | 4KW | 6KW | 10KW | |
| Nominal battery voltage | 12VDC | 12VDC/24VDC | 24VDC/48VDC | 48VDC | |||||||
| Input | DC input range | 10.5-15VDC (12V) / 21-30VDC (24V) / 42-60VDC (48V) | |||||||||
| AC Mains input range | (220/230/240VAC) 140-275VAC | ||||||||||
| AC input frequency | 50Hz: 45-65Hz / 60Hz: 55-65Hz (50Hz/60Hz automatic recognition) | ||||||||||
| Protection | Low battery alarm | ≤10.5VDC (12V) / ≤21VDC (24V) / ≤42VDC (48V) alarm | |||||||||
| Low battery protection | ≤10VDC (12V) / ≤20VDC (24V) / ≤40VDC (48V) automatic shutdown | ||||||||||
| High battery alarm | ≥15VDC (12V) / ≥30VDC (24V) / ≥60VDC (48V) alarm | ||||||||||
| High battery protection | ≥17VDC (12V) / ≥34VDC (24V) / ≥68VDC (48V) automatic shutdown | ||||||||||
| Over load protection | 110% more than rated capacity, automatic shutdown | ||||||||||
| High temperature | Built-in temperature real time sensor, ≥85℃ alarm, ≥90℃ automatic shutdown | ||||||||||
| Short circuit protection | Automatic shutdown | ||||||||||
| Output | Transfer efficiency | ≥87% | |||||||||
| Output voltage | (DC battery mode) 220/230/240VAC±2% | ||||||||||
| Output frequency | (DC battery mode) 60/50Hz±1% | ||||||||||
| Output wave form | Pure sine wave | ||||||||||
| Output voltage | (AC mains mode) stable 220/230/240VAC±10% output (built-in AVR stablizer) | ||||||||||
| AVR output stablizer | AC mains<140VAC±5% swtich to DC battery mode, AC mains>150VAC ±5% return to AC mains mode; | ||||||||||
| AC mains>275VAC±5% swtich to DC battery mode, AC mains<255VAC ±5% return to AC mains mode; | |||||||||||
| The above is for output 220V system reference, 230V/240V output just multiply by percentage | |||||||||||
| Output frequency | (AC mains mode) automatic tracing from AC input | ||||||||||
| Other | Transfer time | ≤8ms | |||||||||
| Display | LCD Display with function buttons | ||||||||||
| Cooling system | Intelligent cooling fan control system | ||||||||||
| ≤42℃ slow fan, ≥45℃ fast fan | |||||||||||
| AC Charger | AC charging Voltage | 13.6-14.2VDC(12V)/27.2-28.4VDC(24V)/54.4-56.8VDC(48V) | |||||||||
| AC charging current | Steady 15A | ||||||||||
| AC over charge protection | Battery ≧16V (12V) ≧32V (24V) ≧64V (48V), stop charging after 60s alarm | ||||||||||
| Working mode (Optional) |
01 | AC mains priority | |||||||||
| Always use AC mains as priority input to provide AC output and automatically charge the battery, | |||||||||||
only stops charging when battery is fully charged, and only starts DC to AC converting untill AC mains is off<
You May Like
Popular Searches
semikron thyristor modules
siemens thyristor module
abb scr thyristors
abb abb
abbs phases
amp igbts power
car gto
darlington power module
data power modul
digit igbt modules
edison module led
eupec igbt power module
high frequency thyristors stud
igbt module fp40r12kt3
igbt module cm200du
igbt module sanrex
Find Similar Products By CategoryYou May Like
| |||||||||||
