2：1 Halogen Free And Low Smoke Heat Shrink Identification Sleeves  Working temperature: -40ºC ~ +125 ºCOil resistant heat shrink marker sleeve is developed environment-friendly flame retardant heat shrinkable tube,Website: , using specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.SB-DIN-M markers are widely used in military industry, aerospace and marine.MaterialThe sleeving shall be fabricated from irradiated, thermally stabilized and flame retarded modified polyolefin compound containing no halogens or cadmium in the formulation.Application rangeIndustrial environment; Rail & mass transit; Aerospace & defense; Marine;Operating temperature range-40ºC --- +125 ºCMinimum recovery temperature+85 ºCMaximum storage temperature+50 ºCShrink ratio2:1ComponentsHalogen-freeColorWhite, Yellow, other color is available if orderedPrinting modeSingle sided printing and Double sided printing formats availableSupplied modeEither Continuous type or Ladder format type is availableRecommended PrintersThermal transfer printerModel NumberAs Supplied (mm)After Recovery(mm)ID(D)Flatten Width(w)Double Wall ThicknessID(d)Single Wall ThicknessDIN-M-2X-1.6-50-2.5K2.00±0.203.7±0.30.48±0.10≤0.790.45±0.06DIN-M-2X-2.4-50-2.5K2.79±0.205.0±0.30.48±0.10≤1.180.49±0.06DIN-M-2X-3.2-50-2.0K3.64±0.236.3±0.40.48±0.10≤1.590.51±0.06DIN-M-2X-4.8-50-2.0K5.26±0.258.9±0.40.49±0.10≤2.360.54±0.06DIN-M-2X-6.4-50-1.5K6.92±0.2811.5±0.40.50±0.10≤3.180.56±0.06DIN-M-2X-9.5-50-1.0K10.2±0.3216.7±0.50.51±0.11≤4.750.59±0.06DIN-M-2X-12.7-50-1.0K13.5±0.3621.8±0.60.52±0.11≤6.350.60±0.07DIN-M-2X-19-50-0.5K20.1±0.4032.2±0.60.53±0.11≤9.530.62±0.07DIN-M-2X-25-50-0.5K26.7±0.4542.5±0.70.55±0.12≤12.70.63±0.07DIN-M-2X-38-50-0.5K39.8±0.5163.2±0.80.57±0.12≤19.10.64±0.07DIN-M-2X-51-50-0.25K53.0±0.5683.9±0.90.58±0.13≤25.40.64±0.08DIN-M-2X-76-50-0.25K79.4±0.56125.3±1.00.59±0.13≤38.10.64±0.09