Mining Dewatering Recessed Plate Filter Press Automatic Chamber
Negotiable /Piece
Min.Order:1 Piece
Wuxi Intergrity Mining Machinery Co.,LTD
Coal Dewatering Recessed Filter Press For Tailings PLC Control
Sludge Dewatering Filter Press Automatic Solid Liquid Separation
Manual Run Dewatering Filter Press , Plate and Frame Filter Press
Automatic Dewatering Filter Press , High Pressure Chamber Filter Press
High Efficiency Deep Cone Thickener Waste Water Clarification
Automatic Rake Lifting Slurry Thickener Flat Bottom Clarifier Hydraulic
Mining Dewatering Recessed Plate Filter Press Automatic Chamber
The diaphragm filter press adopts the most advanced filter process. The unit is used to reduce moisture in materials and increase solid rate by 8% - 35% Wash liquid impurities in press cake to improve purity of the solid ingredients in filter residue Wash the solution in press cake to improve filtrate recovery Air pressing or water pressing can be selected for diaphragm filter plates, with a pressure range of 0.5 to 1.6MPa The frame adopts hydraulic pressing, automatic control, automatic pressure maintaining and programmable functions; all actions are realizable by controlling buttons on electric control cabinet Safety devices are provided to ensure safe operation.
Application: Solid-liquid separation in coal washing, inorganic salt, alcohol, chemical, metallurgy, pharmaceutical, light industry, coal mining, foodstuff, textile, environmental protection, energy source and other industries Chamber Filter Press Programmed Auto High Pressure PP Membrane , waste water treatment system/equipment.
Performance characteristics
The structure is simple, the failure rate is little, the operation is simple, safe, and the maintenance is convenient.
High temperature, high pressure, good corrosion resistance.
Good sealing performance, less material loss when feeding, not easy material, and each filter chamber of uniform pressure is not easy to bad board.
The filtration rate is fast, the filter cake is washed evenly, the moisture content is low, and is suitable for all the solid liquid separation industry.
The hydraulic device is used for pressing and loosening the power mechanism of the filter plate, the maximum compression pressure is 25MPa, and the automatic pressure protection can be realized.
The filtration pressure is 0.5-1.0MPa, to ensure the best condition of forming the filter cake, and carry on the pressure filtration.
Filtration area: 1.0-1180 m2
Low and high pressure: 100 psi (7bar),225 psi (16bar),higher pressure
Slurry temperature: from -10 to + 100°C
Membrane squeezing system: air,water
Standard plate packs: Chamber plate,membrane plate,CGR plate,Plate and frame
Filter plate material: Polypropylene
Closure system: Automatic closure (Electric Hydraulic)
Control systems: Standard control panel,PLC control
Filtration discharge: Open,Close
Filter cake washing/Blowing type
Plate shifting: Manual shifting plate,Automatic shifting plate
Wetted material: Mild steel,SS304,SS316L,PP,Mild steel with TPFE
Custom paint system
OPTIONS:
Expansion options available for future capacity
Two side feeding
Drip tray device
Filter cloth washing device
Filter cloth tilting device
Filter cloth shaking device
Filter cake hopper
Filter cake conveyor
Cake Carts
Chute
Elevated Platforms
Safety: Splash Curtain, Safety Guard, Safety Light Curtains
Text displayer or HMI
DCS
Explosion-proof occasions
working principle
In the feed pump pressure will require filtering material sent to the filter chamber, through the filtering medium (choose suitable cloth according to different industries), the solid and liquid separation. Solid particles form a residue in the filter cloth, filter cake is formed to fill the filter chamber. The filtrate through filter cloth and the filter plate groove flow down to the passage of the liquid, concentrated discharge. Filter is completed, can be washed into the washing liquid filter. After washing, sometimes can also choose to pass into the compressed air, remove residual washing liquid. After filtering open removable filter cake of filter press (filter cake store in the middle of the two adjacent filter plates), cleaning cloth, re compression filter plate began under a working cycle.