Delivery Time:7-15days
Certification:ISO

HF Portable Induction Heating Machine For Forging and Forming

Quick Detail:

Type:Other

Place of Origin:China (Mainland)

Brand Name:Canroon

Model Number:CR2000-03.5A-14T

Voltage:230V

Current:16A

Rated Capacity:3.5KW

Rated Duty Cycle:3.5KW

Dimensions:H:300MM W:245MM D:550MM

Weight:16Kg

Usage: Brazing, Stress relieving and preheating,PWHT

Certification:CE ISO9001:2008

After-sales Service Provided:Overseas service center available

Process:Induction heating equipment

Input Power:230V;1-Phase,50HZ

Temperature recorder:2 Channel temperature recorder

Description:

The new induction preheater CR2000 can be used as an air-cooled system for temperatures up to 1450º F . The preheater features multiple outputs, six control thermocouples to ensure uniform heating, significantly faster time to temperature than conventional heating, and an extremely easy-to-use operator interface that allows the operator to program ramp and hold temperature times. It also tutors the operator to achieve maximum output from the induction coils.

Applications:

With the introduction of theInduction Heating Machine, this simple and cost-effective heating process can be applied in the following applications to deliver fast and consistent heat:

Welding fabrication and construction; Preheating of welds; Post-weld heat treatment; Coating removal; Shrink Fit and so on Pre-heating of an in-service pipeline to 100°C before welding on a sleeve forging heater steel preheating , heat treatment hardening and tempering , preheating gear brazing , copper brazing , metal brazing metal quenching , metal hardening pipe preheating , pipe welding stress relieving , bearing removal

Specifications:

Input Amperes at Rated Output	230V:16A
Thermal conversion efficiency	More than 90%
Maximum Rated output	3.5KW
Cooling Mode	Air cooled
Input power	230V,1-phase,50HZ
Rated Output	3.5KW at 100% duty cycle,1-35KHZ
TC input	2circuit
Digital Recorder	Optional
Control Model	Digital Control
Resonance	Series Resonance
Temperature	Max 1450°F
Dimensions	H:300MM W:245MM D:550MM
Transportation	By sea or By Air
Weight	16KG
Warranty	12 Months

Competitive Advantage:

1.Versatile Mobility:optional running gear designed for construction and maintenance
2.On-board temperature control:provide for manual or temperature based programming in a simple-to-learn operator interface
3.Muitiple control thermocouple inputs:available to control on the hottest TC during heating and coolest TC during cooling for
4.uniform heating and quanlity
5.Open output detection:prevents system operation without a covered output receptacle(cable or protective plug)
6.Isolation fault protection:provides automatic system shut down power source output to ground.
7.Low consumable costs:No fuel costs and minimal insulation costs.insulation is resuable and may be used 50 time or more,reducing costs of disposal and replacement.
8.Uniform heating:maintained along and through the heat zone by using induction to heat within the material.the surface of the part is nor marred by localized conducted heat at higher than specified temperatutes.
9.Time-to-temperature:faster than conventional processes due to methed of applying the heat,reducing the heating heating recyle time.
10.Improved working environment