Customizable Heater Plastic Mold Temperature Controller , 200A Air-break Switch
Negotiable /Set
Min.Order:1 Set
Suzhou Honggan Imp& Exp Co.,Ltd.
Direct Heating Plastic Mold Temperature Controller With K - Thermocouple
120KW Plastic Mold Temperature Controller , 250A Air-break Switch
24KW Plastic Mold Temperature Controller , Circulating Pump Overload Protection
Water Heater Plastic Mold Temperature Controller For Rubber Industy
Dual PID Plastic Mold Temperature Controller 36KW For Textile Machinery
Explosion-proof Plastic Mold Temperature Controller for Hot Rolling Machine
Customizable Heater Plastic Mold Temperature Controller , 200A Air-break Switch ARD-100-80
Quick details
Mold Temperature Control Units
Cooling water lacking protection
No-voltage exhaust protection system
Motor reversion protection
the temperature range from 15°C to 98 °C
power supply 3N-380-50HZ
ARD-100-80 Mold Temperature Control Units(MTC) are specially custom-designed for the temperature control of Rubber & Plastic industry. This series are highly customizable, has special forced cooling function with high-strength cooling capacity. ARD-100-80 can offer the temperature range from 15°C to 98 °C.
SAFETY PROTECTIONS:
No-fuse breaker for the overcurrent phenomenon of general power supply. Motor reversion protection and indicator light up. Cooling water lacking protection and indicator light up. Circulating pump overload protection and indicator light up. BY-PASS pressure release loop for hot oil. Phase failure protection. High-voltage explosion-proof device. Anomaly explosion-proof buzzer. Prevent dry combustion device, discharge scale deposit protection. No-voltage exhaust protection system.SPECIFICATION DETAILS:
No. |
Part |
Specification |
Data |
1 |
model |
ARD-100-80 |
|
2 |
power supply |
3N-380-50HZ |
|
3 |
Hot medium |
water |
|
4 |
control mode |
PC board Self - optimized microprocessor |
|
5 |
accuracy of temp. control |
PID±1℃ |
|
6 |
Max. temperature |
98℃ |
|
7 |
Min. temperature |
15℃ |
|
8 |
heating power |
80KW(adjustable) |
|
9 |
Pump |
model |
CDL32-40 |
power |
7.5KW |
||
lift |
59M |
||
flow |
28M3/hr |
||
10 |
heating method |
Direct heating(Indirect cooling) |
|
11 |
Pipeline |
hot medium inlet/outlet |
DN50(adjustable) |
cooling water inlet/outlet |
DN15(adjustable) |
||
drain oil port |
DN15(adjustable) |
||
12 |
Temp. Controller |
model |
P6100(WEST) |
modulating action |
Dual PID control of heating & cooling |
||
Temp. interaction stick |
K- thermocouple |
||
display status |
Respectively display set point & real point |
||
output select |
SSR output |
||
13 |