UV Laser Drilling Machine JG22
Laser Drilling Machine
Usage
The machine is used to drilling via of FPC flexible printed circuit board, and cover layer cutting , FPC flexible printed circuit board cutting, RF rigid-flexible circuit board cutting.
Feature
1.Precision: Using linear motor, high resolution raster ruler, higher shrinkage compensation and advanced image processing technology, fully guaranteed drilling, cutting accuracy and quality.
2.High quality: Roundness is good and clean. The top and bottom diameter of hole are consistent. The min via hole diameter is 50um.
3.Highly intelligent, efficient: Auto-focus, auto-calibrate, auto-position, auto loading and unloading material by RTR.
Parametres
Specification of UV Laser Drilling Machine (ASIDA JG22)
| ||
MODEL | ASIDA JG22 | |
System Processing Accuracy ( ZHENGYE Conditions) | ±25μm | |
Drilling Speed (ZHENGYE Conditions) | 150 hole per second | |
Roundness | ≥90% | |
Differences Between Up and Down Hole Diameter | ≤12.5μm | |
Objects | Maximum Processing Size | 540mmX650mm |
Processing Capacity | Via hoe drilling, PTH cutting | |
Minimum Processing Hole Diameter | 75μm | |
Laser Wavelength | 355 nm | |
Pressured Air | >0.6MPa;500L per minute | |
Exhaust | 30KPa,8.6CMM | |
Power Supply | Single phase, 220V,50Hz, 2.5KW | |
Dimensions (L×W×H) | 1610mmx1660mmx1901mm | |
Weight | 2900kg |