Delivery Time:7~10 working days
Boat Parts Industrial Ultrasonic Cleaner 264liter Huge Capacity 3000W 100cm Long LS-6001
Why choose ultrasonics?
Ultrasonic cleaning uses ultrasound energy to remove contaminate particles (grease, oils, carbon, flux…) from the surface of an object without damaging the substrate. It is proving an effective replacement for traditional cleaning methods that employ the use of toxic solvents, acid baths, high-pressure water jets and hand scrubbing.
All marine parts need constant cleaning, but only detail cleaning can prevent future corroding.
Limplus boat parts ultrasonic cleaner ensures gentle enough cleaning that doesn’t harm parts, yet the process is powerful enough to completely remove soil and therefore extending operating time of all marine equipment. In either a car or boat motor, an ultrasonic carburetor cleaner is employed to clean either type of carburetors.
By using an ultrasonic cleaner, the process of cleaning boat parts is greatly accelerated and inexpensive, toxic chemicals are replaced in the process by an environmentally friendly and cost effective alternative.
Cleaning time is about 10minutes with suitable detergent.
Oil filtration system for prevent secondary pollution is available.
Features:
Specifications:
Model | LS-6001 |
Tank size | 1000x600x50mm |
Unit Size | 1180x780x800mm |
Ultrasonic power | 3000W |
Heating power | 6000W |
Timer | 1~99hours |
Temperature | 20~80C adjust |
Material | SUS304 / SUS316L |
Voltage | AC220V/AC380V 3phase |
Optional | Rinsing tank, Drying tank, filtration system |
Remark: Any capacity is available from us. Tank size can be customized based on your requirement.
Major advantages:
Consistent cleaning results that are not dependent on operator skill or temperament. Work, health and safety benefits for operators with hands-off cleaning and reduced contact with harmful or harsh chemicals. Increased productivity through multiple parts being cleaned simultaneously and the reduced need to disassemble components before cleaning. Variable and non-contact scrubbing action to remove only the contamination through frequency and power selection. The ability to clean hard to reach areas such as small aperture holes, or tubes such as those found in radiators that are traditionally difficult and time consuming to clean.
FAQ:
Q.: Why need to choose oil filtration system?
A.: Most industrial parts are covered with heavy dust, oil or carbon. with filtration system, we can recycle use the solution when it's expensive and also can avoid secondary pollution while take goods out from tank.
Q: How often should I change the cleaning fluid in my tank?
A: Changed whenever it becomes visibly too contaminated, or when the cleaning process is not as effective.
Q: Why do I need to use a basket?
A: Basket would help to load objects together, and get better cleaning effect.