Delivery Time:20 work days
Certification:ISO9001:2008
Production Description
Spray Desulphurization Tower is the main equipment to absorb sulfur dioxide (SO2), including single tower, twin towers, integrated tower and so on. This kind of tower has advantages of high desulphurization efficiency, little resistance, high adaptability and availability. Spray desulphurization tower is dominated tower among the gas desulphurization process.
Types of wet Scrubber Spray Tower
Single Desulphurization Wet Scrubber
Main-Vice Desulphurization Wet Scrubber
Integrated Desulphurization Wet Scrubber
Integrated Desulphurization Wet Scrubber
Integrated Desulphurization Wet Scrubber is made of carbon steel and lined with flake resin (or granite). The tower can be manufactured in the factory and transport as a whole if the diameter of the equipment is below 5.5m; while the diameter of the equipment is above 5.5m, the tower should be manufactured at site. The integrated desulphurization wet scrubber has the advantages of lightweight and short period.
Installation
Preparation
Prepare scaffold before installation: If the equipment is less than 10t, light steel scaffold is suitable, if the equipment is more than 10t, steel pipe scaffold is advised. Ordinary cement and sand should be prepared well.
Installation Materials
1.Acid-proof mortar (yellow) ,glassy water(transparent liquid), furan powder(black), furan resin (black liquid), the above installation accessories will all be delivered from my company together with equipment.
2.Acid-proof cement: 25kg/bag, equipped with 1kg curing agent, mixing evenly after opening.
Installation Statement
| Installation Statement | |
| 1 | After ensuring the position of desulfurization spray tower, infrastructure should be covered normal mortar, the horizontal position should be found after installing the first section according to the number of each section. |
| 2 | Please ensure the consistency between inlet center of the device and the boiler outlet duct center. The connection should be smooth to reduce the resistance of the system. |
| 3 | When hoisting one section, rub the furan resin daub dispatched together with the equipment and then apply furan powder as well as furan resin daub at a ratio of 2.5:1. Then stir and pave them evenly on the annular face of the shell, about 1 to 2 cm thick. When stirring the daub, we shall control the time. |
| 4 | After acid-proof mortar is used to connect sections, joint should be filled with furan resin daub. |
| 5 | Spray pipe, mist eliminator, back washing pipe should have been installed. If somewhere need to be welded, please pay attention to falling sparks to light up mist eliminator. |
| 6 | After the completion of hoisting the whole equipment, daub shall be used to fill full the notch of each section connection and build a slope that is inclined in a downward way so that the rain dew will not accumulate at the seams of the equipment under outdoor environment. |
