Delivery Time:150 working days
Certification:ISO

  Economic type middle frequency induction tube/pipe bending device

Specification

Bending diameter	159-630mm	Feeding speed	10-100mm/min
Bending radius	2.5-5D	Working power	525kw
Bending angle	0-180°	Voltage	380V 50/60Hz 3phase
Wall thickness	8-60mm	Bending method	Manual/automatic

Description

Adopt electron-magnetic induction principal, quicker heating, less burning loss, lower labor strength.

Induction coils adopt whole heterotype copper pipe winding, tidy and beauty, precise sizes, high mechanical strength, high electrical efficiency.

Hydraulic station adopts well-known variable displacement piston pump. Flow control adopts high precision converter for low flow automatic control.

Heating power supply control mode: automatic and manual.

Closed cooling water tower: needs less space and can be moved and put according to requirements. Less energy consumption, easy and reliable operation.

Automatic control with PC industrial computer and AC servo.

The process can be recorded and stored in the hard disk, and the data can be directly printed. Words input is accepted.

Principle

This complete set of middle frequency induction heating pipe bending machine adopts electron magnetic theory which can converts the 3 phase power frequency into single phase middle frequency power energy. The work-piece is been put into the circumanstance of vacuum and protective gas, and the alternating magnetic field will generate eddy-current loss and produce huge heat, thus it can meet the heating requirement of smelting, diathermanous, quenching and bending.

Application

This complete set of induction heating pipe bending machine is widely used in:

Petrochemical

Power generation

Chemical

Oil and gas

Ship building

Construction

Areospace

Competitive Advantage

Large memory can store various groups of technology.

Cost efficiency. Straight material is less costly than standard components (e.g. elbows) and bends can be produced faster than standard components can be welded.

Elbows can often be replaced by larger radius bends, reducing friction, wear and required pump capacity.

Induction bending reduces the number of welds in a system.Induction bends are stronger than elbows with uniform wall thickness

No welds at the critical points thanks to the tangents.

Even heating temperature makes bending effect consistently.

Stock of elbows and standard bends can be greatly reduced.

Bends can be made from the same base material as the straight pipe.

Detailes Image

 Advanced pipe bending technology for your choice!