Passive POE Injector/Splitter
Detailed Product Description
1:POE splitter
2:INJECTOR
and SPLITTER.
3:Complete set for wide range of network products such as
Access Points
POE splitter
The
complete Passive Power over Ethernet SET contains two pieces - INJECTOR and
SPLITTER. It is suitable for using with products that basically do not support
Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide
range of network products such as Access Points, Routers, IP cameras, modems,
switches, embedded computers or other network devices. Passive Power over
Ethernet SET is compatible with most devices available on the market such as
D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be
supplied standardly up to 50V. (The power adapter is not included - it is
possible to use the power adapter of the powered device as access point, IP
camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the
real distance depends on the power supply, type of cable and powered
device).
Contains: INJECTOR and SPLITTER.
Complete
set for wide range of network products such as Access Points, Routers, IP
cameras, modems, switches, embedded computers or other network devices such as
D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using
passive POE injection.
Connector Barrel size is 2.1mm (5.5 x
2.1 mm)
Power Pins 4,5
+ and 7,8 -
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.
2. On the opposite end (RJ
socket) we connect the Ethernet cable leading to the far
end.
3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them.
