Follow the regulations of cGMP, PIC/S GMP, FDA

WIP System is available

Explosion Proof System is available: Suitable for organic solvent

Multi-safety Interlock System:

 Stop operation when the cover is not closed properly

Stop operation when the air pressure is not sufficient for the seal

Separated compressed air routes design to meet the good air quality: the compressed air for air seal will pass through an air filter. For the cylinder, the compressed air will pass through lubricating oil to ensure the air quality and lubrication

Unique design of the air seal: This design can prevent powder access into the main seal and the chopper to prevent powder dropping

The clearance between impeller and the bottom of mixing bowl is only about 0.5~0.8 mm; therefore, high mixing efficiency can be achieved

Raw Material Grinding & De-agglomeration: It has the function of griding the lumps to smaller particle size. This can pre-process raw material to eliminate irregularities, therefore it will improve the mixing efficiency.

Size Reduction: Fix the oversize raw material t a smaller and uniform particle size.

Dry Granulation & Milling: Dry granulation can reduce granule/powder into desired range of particle size.

Wet Granulation & Milling: Wet material is reduced to a small and uniform particle size before drying. It produces small and uniform size fine powder form agglomerates that are produced by mixer. This is perfect for the dryer to take short time of achieving the uniform drying.