Delivery Time:10 working days after received your payment
Certification:CE / ROHS / FCC / SGS

HDMI Signal Extender over 100m support POE function with HDBaset

Introduction :

The cat5e / cat6 HDMI Extender is a tool which can extend your HDMI signal over 328fts / 100meters to a compatible display . It is designed to convert HDMI signal to standard HD BaseT signal which can be transmitted by Internet cable . It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal , so you can control the Source in the Sink side which is 328fts outside , also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender .

Features :

 POE ( Power Over Ethernet ) function is supported , either TX or RX is powered by24V @ 1A power supply , another does not need power from the DC jack . POE Power consumption is less than 10W . -  See the description 1  Use single UTP LAN cable ( CAT - 5E / 6 ) to substitute HDMI cable to achieve long distance transmission .  UTP cable termination follows the standard of IEEE - 568B . Transmission distance :  ※ Over CAT6 cable 100 meters : 1080P @ 60Hz36bit ; 3D1080P @ 30Hz36bit ; 70 meters : 1080P @ 60Hz @ 48bit ; 1080P @ 120Hz @ 24bit ;  3D1080P @ 60Hz @ 36bit ; 4K x 2K @ 30Hz @ 24bit. Support display resolutions up to 4K x 2K @ 30Hz Full HD support : 1080p @ 60Hz @ 48 bit / pixels , 1080p @ 120Hz @ 24 bit / pixels , 3D 1080P60Hz and 4K x 2K @ 30Hz @ 24bit . Transfer Bidirectional Infrared control signal together with the HDMI signal . - See the description 2 .

Specifications 

Frequency Bandwidth	297MHz  [ 10.2Gbps ]
Transmitter Input / Output Ports	1 x HDMI Female port / 1 x CAT6
	1 x IR Tx / 1 x IR Rx
Receiver Input / Output Ports	1 x HDMI Female port / 1 x CAT6
	1x IR Tx / 1 x IR Rx
Power Supply	DC 24V 1A
ESD Protection	± 8kV ( air - gap discharge )
Human Body Model :	± 4kV ( contact discharge )
Dimensions ( mm )	65 ( W ) X 100 ( D ) X 25 ( H )
Weight	200g x 2
Operating Temperature	0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature	- 20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity	20 ~ 90% RH ( Non - condensing )
Power Consumption ( Max )	10W

Package Contents

HDMI Extender Transmitter	1PCS
HDMI Extender Receiver	1PCS
Wideband IR Tx	2PCS
Wideband IR Rx	2PCS
24V1A DC Power Supply	1PCS
Operation Manual	1PCS
Mounting ears	4PCS

Operation controls and Functions

Transmitter

1 . DC IN : Plug the 24V DC power supply into the unit .

2 . IR OUT : Channel 1 IR Transmitter. Connect with Wideband IR Tx .

3 . IR IN : Channel 2 IR Receiver. Connect with Wideband IR Rx .

4 . HDMI IN : HDMI input port . This slot is where you connect the HDMI source .

5 . HD BaseT OUT : Standard HD BaseT signal output port . Connect HD BaseT receiver with a UTP cable following the standard of IEEE - 568B .

6 . LINK LED : The connection status indicating lamp .

Illuminate : The Transmitter and Receiver are in good connections Flashing : The Transmitter and Receiver are in poor connections Dark : The Transmitter and Receiver are in no connections

Receiver

1 . DC IN : Plug the 24V DC power supply into the unit .

2 . IR IN : Channel 1 IR Receiver . Connect with Wideband IR Rx .

3 . IR OUT : Channel 2 IR Transmitter . Connect with Wideband IR Tx .

4 . HDMI OUT : HDMI output port . This slot is where you connect the HDTV or monitor with HDMI cable .

5 . HD BaseT IN : Standard HD BaseT signal input port . Connect HD BaseT transmitter with a UTP cable following the standard of IEEE - 568B .

6 . LINK LED : The connection status indicating lamp .

Illuminate : The Transmitter and Receiver are in good connections Flashing : The Transmitter and Receiver are in poor connections Dark : The Transmitter and Receiver are in no connections

Description 1

POE(Power Over Ethernet) Application Example

<