180 Degree Folding Arm Car Parking Barriers With White Rubber To Protect Car
Negotiable /Piece
Min.Order:1 Piece
Shenzhen Wonsun Machinery & Electrical Technology Company Limited
Security Barriers And Gates Vehicle Barrier Gate With 2.4G Rfid Long Rang Reader Handle
OEM Automatic Gate Barrier Vehicle Barrier Gate For Parking System
OEM Folding / Fence Arm Parking Lot Barrier Gates Automatic Boom Barrier AC220V
High Sensitive Custom Remote Control Barrier Gate For Highway / Parking Lot
8M Straight Boom Road Barrier Gate Automatic Gate Opener CE / ISO
180 Degree Folding Arm Car Parking Barriers With White Rubber To Protect Car
Basic Features:
1)Heavy-duty design 24-hours continuous application
2)Auto closing function is selectable with instant or delay closing
3) Low speed set by open or close limit switch for cushioning effect
4) Multiple push button for Open, Close and Open/ Stop/ Close function
5) Simple interface with proximity card and loop detector application
6) Articulated or folding arm available for limited height application
7)Most of the accessories and spare parts are common items
8) Barrier arm can be manually lifted via a clutch-release key
9)Weather-resistant coating against hostile environments
10)Arm available for 1-6meters length
11) Able to swing out
Specifications
Model |
WSTP-118 |
Working Temperature |
-40℃~+75℃ |
Voltage |
220V±10%, 110V±10%, 50/60HZ |
Rated power |
80W |
Relative humidity |
≤90% |
Remote control distance |
≥30m |
Net weight |
48kgs |
Speed |
1S,1.8S,3S, 6S |
Max boom length |
6 meters |
Motor Rotational speed |
1400rmp |
Protection Degree |
IP44 |
Package List :
1 pcs Gate Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
Communication with customers
1) Q: Connected power and press open/close button but traffic barrier gate no action?
A |
Reason |
Solution |
1 |
Fuse blown |
Check fuse and power in controller |
2 |
Battery of remote control powered off |
Change a new one |
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
A |
Reason |
Solution |
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
2 |
Main controller failure |
Change a new one |
3) Q: Motor running but traffic barrier gate arm no action?
A |
Reason |
Solution |
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
2 |
Tension of balancing spring not suitable |
Adjust spring exactly |
3 |
Low working voltage |
Check the voltage and power |
4) Q: When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?