Gantry Type Slewing Bearing Single Gear Roller Quenching Machine

Gantry Type Slewing Bearing Single Gear / Roller Quenching Machine This machine adopts multi columns,Website: , transverse beams and a rotary working table, and the bed adopts plate welding and aging treatment. This machine has a good rigid performance, and the transformer can move around. The rotary working table is driven by an AC servo motor, and the guide adopts a rectangular linear guide. The rotary working table can separate gears automatically. Manual adjustment is unnecessary during quenching, and the equipment can finish the quenching automatically. This machine can be used for ring type single-gear or roller scanning quenching.Configuration:Machine structure: upright columns plus a horizontal rotating tableRotation mode: automatic gear separationWorking mode: Horizontal supporting type (positioning fixture can clamp the workpiece inner / outer ring)Fixture: manual alignment (automatic alignment, and automatic clamping/unclamping are also available)Induction coil and workpiece quenching clearance: electrical automatic tracking device / mechanical floating tracking deviceElectric control: touch screen and PLC/Siemens 808D/802C//828D/840DSL.Big/small work-piece adjustment: Adjust transformer sliding table(transverse beam moving)Display: axis coordinate and speed, water temperature, quenching fluid flow, pressure, quenching power, frequency, gear parameters and so on.Driving motor: AC servo motorNumber of axis:6Work station: 1 (2 stations are optional)Adaptability: adapted to both track quenching and gear quenchingSpace between tracks: including two tracking modes: electronic track and mechanical track. In electronic track, the tracking space is within 0.1mm to ensure the quenching quality consistency.Consistency of quenching quality: good