400W Dimmable Constant Voltage Led Driver Universal for Large LED Billboard
Negotiable /Piece
Min.Order:1 Piece
Outdoor Light 24V 10A Constant Current Led Driver IP65 High Efficiency
250W Simple Constant Current Led Driver Dimmable For Commercial Lighting
36V Adjustable Constant Current Regulator Led Driver Environmentally Friendly
42V Safety Constant Current Dimmable Led Driver Lightweight For Street Lighting
Compact 48 Volt IP67 Led Power Supply Constant Current 240 Watt
400W Dimmable Constant Voltage Led Driver Universal for Large LED Billboard
Specifications
Input: 90 ~ 264 Vac; Output Power: 400W | |||||
Environment | |||||
Parameters | Min. | Typ. | Max. | Unit | Note |
Working temperature | -25 | 65 | 85 | ° C | Test points: the cInput of the cover from the output port40mm |
Storage temperature | -25 | 25 | 100 | ° C | |
Relative humidity | 5 | 95 | % | Non-condensing | |
Altitude | 0 | 4000 | m | Where the temperature derating300 0 ~ 4000m under the conditions of use, increased by 1 ℃ lower 200m | |
Cooling | Natural heat conduction | ||||
Input | |||||
Parameters | Min. | Typ. | Max. | Unit | Note |
AC input voltage range | 90 | 110/220 | 264 | Vac | |
AC input voltage frequency | 47 | 50/60 | 63 | Hz | |
Power Factor | 0.95 | 220 Vac loaded | |||
Input surge current | 60 | A | 220 Vac full load / cold | ||
AC input format | Single-phase input | Support single phase | |||
L, N | |||||
Output | |||||
Parameters | Min. | Typ. | Max. | Unit | Note |
Output voltage range | 4.2 | 4.6 | 5 | Vdc | Adjustable output voltage |
Output voltage setting | 4.55 | 4.6 | 4.65 | Vdc | |
Output Current Range | 0 | 80 | A | The full input voltage range | |
Load Regulation | ± 1 | % | Rated input voltage, full load change | ||
Regulation accuracy | ± 5 | % | The full input voltage range /full load output | ||
Source regulation | ± 0.5 | % | Rated current output, the full voltage range | ||
Noise + Ripple(peak to peak) | 200 | mV | Over the full input voltage and load range, and the output of the test in Canada and 0.1uF ceramic capacitor or a gold film capacitors and electrolytic capacitors 10uF each one, the oscilloscope bandwidth 20MHz | ||
Other output characteristics | |||||
Parameters | Min. | Typ. | Max. | Unit | Note |
Output Power | 400 | W | |||
Output efficiency | 86 | 89 | % | 220Vac input and output full, normal temperature test | |
Dynamic response overshoot | ± 5 | % | 25% -50% -25% or 50% -75% -50%load change, current change rates 0.1A / us, cycle 4ms | ||
Dynamic response overshoot | ± 10 | % | Output from no sudden 100%load, the output from full load to no-load, back and forth transition (transition time5ms, after the jump can be maintained for several cycles), the output of the oscillation, the output voltage measuring the output voltage waveform, the module should not appear10% overshoot does not exceed the value of the output voltage setting | ||
Temperature Coefficient | ± 0.02 | % / ℃ | Rated output voltage and output current, wide operating temperature | ||
Power-output delay | 2 | S | 220Vac at full load test | ||
Switch Overshoot | <
Miss. Vivian
sale Manager
Chat Now
Telephone
86-755-83343146
Mobile
86-75583343146
Fax
86-755-83343146
Skype
fengl@techone.com.cn
Address
2F Spring Valley,BLCV,No.10 LongChangRd.Bao\'An Liaocheng,Shandong
Showroom
|