High Volume Drive In Drive Through Racking System Australia AS4804 For Raw Materials
USD $850.00 - $1050.00/ /Piece
Min.Order:1 Piece
Warehouse Metal Steel Storage Drive In Racking System Space Saving 500-2000KG / Pallet
Stackable Metal Drive In Racking High Density Storage First - In - Last - Out Principle
Customized Selective Stackable Drive Through Pallet Racking For Cold Room Storage / Food Industry
Multi Category Detachable Radio Shuttle Pallet Racking For Distribution Center
High Density Commercial Shuttle Pallet Racking System for Warehouse Storage Goods
Multi Level Durable Steel Shuttle Storage System For Storage Irregular / Shape Goods
Australia AS4804 Drive in Racking For Warehouse Storage System
Standard Pallet Size:
1. 1200L * 1200D * 150Hmm
2. 1200L * 800D * 150Hmm (European Standard)
3. 1000L * 1200D * 150Hmm
4. 1100L * 1200D *150Hmm(Asia Standard)
5. 800L * 800D * 150Hmm
Description:
1. Also known as "into racking type shelf" corridors. This is a not to channel segmentation, continuity of the whole building racking. In the longitudinal direction, tray deposited, based on depth, which makes a followed a high-density storage possible. Goods from the shelves of the unified access, "after be being put first measured with take after take,". The balance weight and moved forward type forklift may easily among access goods into shelves
2. Into racking investment relatively low cost, use and transverse dimensions of bigger, quantity and variety, have less access mode can be scheduled goods, commonly used to store large quantities of the same kind of goods. Because of its storage density of ground space utilization, such as higher, commonly used in the refrigerator storage space where high cost
.
Features with specification :
Features |
1. All racking shall be fixed onto the ground by means of Expansion bolts 2. Protector is recommended to mount in the junction of over two directions 3. Apperance is the Electro Static Dusting Spray 4. Each beam is secured by 2 safety pins 5. The layer can be steel plate , wood plate or steel pallet |
|||
1. Easy assemble and disassemble; 2. 75mm can be freely adjusted for beam 3. Can highly improve storage space 4. Units can be connected to limitless lengths according to site space. |
||||
Loading Capacity /layer |
Usually from 500kg to 5000kg Also can design according your requirement |
|||
Specification of rack | Length | From 1500mm to 3900mm | ||
Depth | From 800mm to 1800mm | |||
Height | From 1800mm to 12000mm | |||
Note: Also can design and produce according to your special requirements | ||||
Upright specification |
88*66*1.5mm 88*66*1.8mm 88*66*2.0mm |
100*80*2.0mm 100*80*2.5mm |
120*80*2.0mm 120*80*2.5mm |
140*80*2.0mm 140*80*2.5mm |
Beam Specification | 88*40*1.5mm | 108*40*1.5mm | 125*45*1.5mm | 145*50*1.5mm |
165*50*1.5mm | 165*50*2.0mm |
Drive in Rack Detail for Reference
Reference Photo