High Strength Cold Rolled Steel Coil Metal Waterproof Heat Resistance
Negotiable /Piece
Min.Order:1 Piece
Non Alloy Welded Galvanised Steel Square Tube Hollow Section Black
Galvanized Square Steel Pipe Hollow Section Double Submerged Arc
Gas Shipping Hot Rolled Alloy Steel JIS SG295 Impact Resistance
Large Hot Rolled Steel Coil Anti Slip High Surface Hardness For Power Plants
Bright DC03 Grade Cold Rolled Steel Coil Stamping Fire Resistance
Black Hot Rolled Metal , Hot Dipped Galvanised Steel ISO 9001
SPCC-SD 0.2 ~ 2.0mm Cold Rolled Steel Sheet Coil , JIS G3141
Specification
Standard | JIS G3141 |
Grade | SPCC-SD |
Thickness | 0.2 – 2.0 mm |
Width | 600 - 1570 mm (according to your need) |
Tolerance | Thickness: 0.02mm Width:0.02mm |
Coil Weight | 3-15tons , or according to Buyer’s requirement |
Coil ID | 508 / 610 |
Technique | Cold Rolled, Annealed |
Surface | Oil/dry/ passivation / pickling |
Shipment time | within 28-35 workdays |
Export package | Mill's standard export package, Antirust paper, antirust film, iron angle bead, iron packing board, binding belt or according to buyer's requirements. |
Payment | T/T, L/C at sight |
Product Uses
Application | Features |
Steel grades for example |
Commercial purposes | With some ductibility, they are suitable to simple forming, bending or welding | DC01, SPCC, St12 |
Drawing | With more ductibility than the common ones, they are suitable to manufacturing parts through drawing and relatively complicated deforming | DC03, SPCD, St13 |
Deep drawing | With more ductibility and homogeneity than the drawing ones, they are suitable to manufacturing parts through deep drawing and complicated deforming. | DC04, SPCE,St14 |
Extra-deep drawing | With more ductibility and homogeneity than the deep drawing ones, they are suitable to manufacturing parts through extra-deep drawing and more complicated deforming. | DC05, SPCF, St 15 |
Supreme extra-deep drawing | With more excellent drawing capability than the extra-deep drawing ones, they are suitable to manufacturing parts through supreme extra-deep drawing and extremely complicated deforming. | DC06, SPCG, St16 |
Technology
Steel grades |
Yield strengtha Mpa |
Tensile strength Mpa | After breakage percent elongation(Lo=80mm,b=20mm)Aa%≥ | Average RC | |||||
<0.4 | 0.4~0.6 | 0.6~1.0 | 1.0~1.6 | ≥1.6 | |||||
SPCCb | ------- | ≥270 | 31 | 34 | 36 | 37 | 38 | --- | |
SPCDb | ≤240 | ≥270 | 33 | 36 | 38 | 39 | 40 | --- | |
SPCEb | ≤220 | ≥270 | 35 | 38 | 40 | 41 | 42 | --- | |
SPCF | ≤210 | ≥270 | --- | 38 | 40 | 40 | 41 | --- | |
SPCG | ≤190 | ≥270 | --- | 39 | 41 | 41 | 42 | 1.8 | |