With good performance controlling mode DSP  The material of swing gate is organic glass, and tempered glass can be optional; Equipped with the dry contact signal input interface, RS485/RS232 interface, TCP/IP interface (optional), compatible with all kinds of access controllers; The machine core is from European DC brushless motor and precise positioning encoder.

Technical Parameter:

Communication Interface	RS485 / RS232 (default); TCP/IP (optional)
Casing Dimension	1600×205×990mm  (single unit); 1600×285×990mm (middle unit)
Swing gate material	Organic glass (default); tempered glass (optional)
Mechanism	MTHTTM Lossless mechanism
Operation Voltage	DC24V
ontrol Input / Output	12 channels relay control output / 8 channels dry contact signal input
Operation Temperature	﹣20℃~60℃
Power and Voltage	100-240VAC, 50/60HZ
Positioning Method	Encoder
Evacuation Passage Speed	60 people / min
Working Environment	Indoors
Casing Material	304 grade stainless steel

 

Basic Function:

Passing mode switching function: The entry and exit can be set independently【controlled mode】 /【 free mode 】/【 forbidden mode】 Automatic reset function: The turnstile will open the gate after receiving the valid opening signal when standby.The swing gate will return to the hindered zero position automatically under the following situation:

         1)  Within the allowed time, pedestrians have been detected in the specified direction passing the                passage;

         2)  Over the allowed time, there is no people has been detected passing in the passage.

Automatic adjustment function: When the turnstiles need to re-adjust because of mechanical wear, the main board can automatically adjust, accurate and convenient. Self-recovery function: The swing gates do not return to the hindered zero position because ofhuman intervention. After revoking human intervention, the gate automatically return to the hindered zero position. Memory function of passing requests: When more than 2 passing signals are given at the same time (including the same direction and opposite direction), the system will remember all the passing requests and finish them one by one.The number can be up to 255. Compatibility: Equipped with the dry contact signal input interface, RS485/RS232 interface, TCP/IP interface (optional), compatible with all kinds of access controllers. Passing indication function:

         The direction indicator is installed on the top of the housing to indicate the valid passing direction.