Ship-Borne / Vehicle-Borne Navigation Gyroscope System , Fibre Optic Gyro
Negotiable
Min.Order:1
Infrared Thermal Imaging Electro Optical Sensor System with Gyro Stabilization
Ultra-long Range Surveillance Radar System For Air Stealth Target Detection
High Accuracy Vertical Fiber Optic Gyro System for MEMS / GNSS Navigation
Compact Long Range Laser Rangefinder 20km LRF Thermal Range Finder
High Sensitive Thermal Infrared Camera Module For Security And Surveillance
EOTS / EOT Coastal / Borden Surveillance Electro Optical Tracking System 324256 Pixel
Ship-Borne / Vehicle-Borne Navigation Gyroscope System , Fibre Optic Gyro
Attitude and Azimuth Integrated Navigation System (Fiber Optic Vertical Gyro) AINS-20
Employing high accuracy FOG, Q-flex accelerometers, dual-frequency GPS position & orientation system, barometric altimeter and advanced integration navigation and attitude measurement algorithm, the performance of Attitude and Azimuth Integrated Navigation Fiber Optic Vertical Gyro has been dramatically improved. Combining built-in high accuracy IMU (inertial measurement unit) with satellite, it could output high accuracy position, speed, attitude, angular speed and acceleration information. While the satellite signal is completely covered, system would enter into pure inertial mode. By use of high accuracy FOG, it could still keep good attitude measurement accuracy in certain time. Integrated with barometric altimeter, it could make correction and get higher accuracy height information.
Application
Aircraft flight control and navigation
Ship-borne & vehicle-borne navigation system
Inertial stability control system
E-traffic measurement system
Industrial & agricultural measurement and application
Technical Specifications
Range | |
Heading | 0~360°, |
Pitch angle | ±90° |
Roll angle | ±180° |
Angular rate | ±300°/s |
Acceleration | ±10g |
Positioning & orientation accuracy | |
Heading accuracy (GPS valid) | 0.1° (length of baseline 2m, 1σ) |
Attitude (GPS valid) | 0.05° (1σ) |
Position accuracy (GPS valid) | 3m (CEP) , 2cm+1ppm(CEP) (post-differentiation) |
Velocity accuracy (GPS valid) | 0.1m/s (rms), (1σ) |
Preparation time | |
Start time | ≤10s |
Stable time | System working normally after GPS and heading valid (specified time depends on surrounding environment, open field 2min) |
Power supply | |
Power supply | DC12~32V, 24V±10% (rating) |
Power consumption | ≤25W |
Reliability | |
MTBF | 2000h |
Continuous working time | ≥12h |
Physical parameters | |
System weight | ≤3.6kg (excluding antenna and feeder line) |
Physical dimension | 191mm×166mm×131.5mm (X, Y, Z) |