MDF Series Vertical Multi-stage Centrifugal Pump
USD $10 - $1000 /Piece
Min.Order:1 Piece
Hangzhou Shuang Yu Mechatronics Co.,Ltd
MDF Series Vertical Multi-stage Centrifugal Pump
Product description:
MDF series is a kind of vertical non-self priming multistage centrifugal pump,which is driven by a standard electric motor. The motor shaft directly connects with the pump shaft through a coupling.The pressure-resistant cylinder and flow passage components are fixed between pump head and in-and outlet section with tie-bar bolts.
It employs hard alloy mechanical seal. The inlet and outlet are locatted at the pump bottom at the same plane.This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running,out-of-phase and overload.
Feature:
1.small size,light weight, low noise
2.high efficiency,energy saving
3.no leaking, smooth and steady operation,long life span
4.vertical mounting and beautiful design
5.the seal for axis is sealed by wear-resistant mechanical.
Applications:
It is It can be used to convery various medium,from tap water to industrial liquid at different temperature and with different flow rate and pressure.
It is used in bolier water supply,also in high building,agriculture irirgation,pressurize in fire fighting,medicines,chemical industry, aquatic product cultivation,etc.It is as an motive power device in water supply and water drainage.
Product data:
Refered Model |
MDF8-20 |
Rated frequency (Hz) |
50/60 |
Rated output (kw) |
0.37-50 |
Voltage(V) |
110V/220V/380V/415V/order |
Caliber (mm) |
25-200 |
Max flow(m3/h) |
0.5-40 |
Max lift(m) |
4-250 |
Speed(rpm) |
2900/others |
Motor insulation |
IP54/others
|
Medium temperature |
-15οC~+120οC |
Designation:
MDF8-20
MDF-Light vertical multi-stage centrifugal pump
8-Rated flow(m3/h)
20-Stage*10
Conditions of use:
1.The pump is used for the transportation of pure water or the liquids with their chemical and physical properties similar water.
2. Medium temperature: -15οC~+120οC
3. Ambient temperature: up to +40οC; Relative humidity: up to 95%
4. Altitude: up to 1000m
5. Max working pressure: 2.5Mpa
If the pump is used for transportation of corrosive or high temperature liquids,please remark when you order products that we use special materials to you're your requirements.