Leather Car Upholstery Fabric, buy Imitation Leather Upholstery Fabric For Cars , Automotive Upholstery Fabric on China Suppliers Mobile

Product Details

Delivery Time:About 12-15days after receiving 30% deposit
Certification:SGS TUV BLG

Imitation Leather Upholstery Fabric For Cars , Automotive Upholstery Fabric

Quick Detail:

Description:

Elongation
Weft: >15% Longitude: > 10%
Anti-hydrolysis(shelf life)
At least 3 years
Color fastness to light
> BWS 5
Cold crack of finishing
No cracking -30℃
Fire Retardant
BS5852 CA117 FAR25.853 CFR1633 FMVSS-302
Color fastness to Rubbing
(Change of leather color)
Dry: >500 cycles GSR 4
Wet:>250 cycles, GSR 4 Perspiration:>80cycles GSR4

Name of Product	imitation auto leather
Composition	30% real leather+40%PU coating+15%cotton+15%polyester
Texture of surface leather	Printing and Embossing
Width	1.37meters / 54inches
Thickness	1.0-1.2mm
Weight	500-800g/m2
Surface color	grey beige steel etc
Backing color	Common color: Natural color ,black,light brown,coffee
Abrasion resistance	At least 250,000 Martindales
Tensile strength	Weft: >70lbf/3cm Longitude: > 80lbf/3cm
Tearing strength	Weft: >10lbf/3cm Longitude: >12lbf/3cm
Peeling strength	Weft: >3kg/3cm Longitude: > 3kg/3cm

Junhua leather factory mainly manufacture imitation leather ,copy the genuine leather .The material is made from 30% leather composition,40%PU coating,15%cotton and 15%polyester with 1.0mm-1.2mm thickness , naturally FR and at least 3 years`using guarantee.It out-performed traditional genuine leather ,because leather width is the regular 1.37meters ,then it will increase leather use rate ,means that can be made for more furniture sofa. To decrease the labor cost ,it is easy for workers to cut and sew the leather.It is very similar with traditional genuine leather in touch, smell and physical specifications, what`s more, the price is much cheaper than the traditional real leather .It is really a better choice for you to instead of traditional buffalo leather.

Applications:

To be used auto seats ,car seats,auto aiming circle ,air plane seats etc

Specifications:

Chemical Test :

Test	Method	Requirement	Results	Pass/Fail
Azo dyetuffs (Arylamines)	BLC7C.1based on BS EN ISO 17234-1:2010	Not detectable (detection limit:30mg/kg)	None detected (<30mg/kg)	Pass
Chromium VI,soluble	BS EN ISO 17075:2007	Not detectable (detection limit:3.0mg/kg)	None detected (<3.0mg/kg)	Pass
Formaldehyde	BLC 7A.9 based on BS EN ISO 17226-1:2008	General <75mg/kg	54mg/kg	Pass
Chlorinated phenols PCP,TCP&TeCP	BLC 7B.5 based on BS EN ISO 17070:2006	Not detectable (detection limit:1.0mg/kg)	None detected (1.0mg/kg)	Pass
PH	BS EN ISO 4045:2008	Min.3.2.if the pH value is below 4 or above 10,the diff.figure shall be <0.7	PH=6.19	Pass
Extractable heavy metals screening	BS EN 71-3:1995 Migration of elements	Pass as specified in BS EN 71-3:1995	See separate table for indivi -ual result	Pass
Dimethyl fumarate (DMF)	BLC 7A.6 GC-MS analysis	None Detectable <0.1mg/kg	None detected (0.1mg/kg)	Pass

Competitive Advantage:

1. Price is much cheaper than Natural Leather.

2. No difference between different par