Delivery Time:1-2days
Certification:CE FCC

Multicolor PLA 3D Printer Filament , Recycling PLA 1.75mm Filament

Description:

ABS Filament and PLA Filament is commonly used in 3D printing, has the following characteristics:

1. High strength, good toughness,no foreign smell;

2. Density is small, when printing larger volume model lighter, save money;

3. Cost-effective, can be processed in wide range temperature;

4. As for the material the ABS is softer than PLA

5. PLA Filament has small shrinkage even when printing big size model;

6. 1 kg /plastic spool packaging, can be automatic feed;

7. To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.

8. There's no bubble during printing.

9. Make sure the printing accuracy is extreme high

Parameters:

	MINGDA 2016 New Filament
Name	Color	Diameter(mm)	Weight
PLA	pure transparent, white, black, orange, yellow, green, red, pink, purple, grey, blue, gold, silver	1.75	1.0kg/ Roll
		3.00	1.0kg/ Roll
WOOD	wood	1.75	1.0kg/ Roll
		3.00	1.0kg/ Roll
ABS	pure transparent, white, black, orange, yellow, green, red, pink, purple, grey, blue, gold, silver	1.75	1.0kg/ Roll
		3.00	1.0kg/ Roll
HIPS	pure transparent, white, black, orange, yellow, green, red, pink, purple, grey, blue, gold, silver	1.75	1.0kg/ Roll
		3.00	1.0kg/ Roll

Brief Characterics:

ABS (Acrylonitrile butadiene styrene) is an oil based filament and has a higher melting point than PLA. ABS filament is commonly used in 3D printing. It has the following features:

Softer than PLA, but high strength, good toughness; Density is small, when printing larger volume model lighter, save money; Cost-effective, can be processed in wide range temperature; Accurate diameter: 1.75/3.0mm, variations + /-0.05mm, roundness 0.03mm;

PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch.
Its extrusion-temperature is much lower than ABS, and most often doesnt require a heated bed.
It has the following features:

Can be processed at 185 degrees Low shrinkage, thermoforming dimensional stability Good toughness high strength, high stiffness ; No block nozzle, good stick hot bed, a smooth PLA used Accurate diameter: 1.75/3.0mm, variations + /-0.03mm, roundness 0.02mm

Advantages