Stainless Steel Mesh

Characteristics: Acid, alkali, corrosion resistance. High filtration precision, long service life.

Plain weave dense: Diameter wire between the aperture, weft relatively thin, between the pore size is small, this method has higher strength and smaller mesh, mainly used for cloth, mesh shape and position of the particles contributes to the retention of small, enhance cake shape.

Twill weave dense: A combination of plain weave microgroove and twill weave characteristics, weft and the adjacent every two diameter wire staggered up and down, the formation of pores in one direction, coarse pores formed another direction, the weave net than plain weave dense net can bear bigger load, compared with twill weave net smaller mesh, is used to filter the heavier materials.

According to the weaving method is divided into plain weave, plain Dutch weave, twill weave, twill weave four mesh.

Plain weave: Each wire cross through in each warp wire down, weaving warp and Wei Xiancheng 90 degree angle.

Plain Dutch weave: Each wire cross through in a weft wire, braided each warp wire cross through a wire on the.

Twill weave: Each wire cross through in every 2 weft wire, braided each warp wire cross through in every 2 wire on the.

Mesh twill weave: Each wire cross through in every 2 weft wire, braided each warp wire cross through in every 2 wire on the

Material: 304 304L 316 316L stainless steel wire

Use: Health, scientific research, drying, pharmaceutical, chemical, electronic, filter, chemical fiber, dyeing and printing industry.

At present, I-Net specification produced by our factory is: 60 -3500 mesh, net width 1m-1.6m, special specifications can be processed.