Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Good conductivity Lightning Ground Rod , copper clad earth rod / pole

FEATURES          

1. Thickness no less than 0.25mm

2. Tensile Strength than 580N/ mm2

3. Straightness error less than or equal to 1mm/m

4. At least 50 years service life

5. Easy installation and low construction cost

MODEL	Copper layer Thickness	Diameter	Length of supply	Packing
Mil	mm	Inch	mm	Feet	mm	pc/bundles
CN-A-18		0.254		18	4	1200	20
6	1800	10
8	2400	10
10	3000	10
20	6000	5

Technical Specification    

                                                                        
1) The purity of the copper which used as cladding is more than 99.95%.

2) The steel core is low carbon steel which the carbon content is about 0.15%.

3) The copper bonded ground rod will be capable of being through 90 at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.

4) Good in anticorrosion that usage-life is more than 50 years, constant low resistance and good plasticity which has the characteristics of the pure copper.

5) The earth rod is fully covered with copper cladding without any cracks, holes, cavities etc. Preventing exposure of the steel core to soil and moisture, so as to form a good corrosion resistance.

We can supply threaded rods in all sizes and shapes.  

                                              
1) Copper Clad Steel Grounding Rod can be made double heads thread, thread can be packed by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is flat.
* Special sizes and shapes and copper thickness can be customised according to your demands if you can\'t find the specification you need in the above table.