Product Details
YH-908YB is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.1.Advantages:☆ High gelling efficiency over low to medium polarity organic liquids,Website: , especially in aromatic compounds.☆ Ideal thixotropy property and anti-sediment property.☆ High viscosity and excellent thickening property over a wide temperature range.☆ Imparts particle suspension, preventing hard settling of pigment and fillers.☆ Exerts strong film reinforce action in organic binder systems.2.Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )Light YellowFree Flowing Powder1.7g/cm3≤3.5%≥98%≤35%3.Typical Applications:●Acrylic paint●Road paint●Alkyd paint●Inks(mineral oil)●Anti-corrosion paint●Inks(Nitro)●Baking paint●Adhesive●Bituminous paint●Putties and sealant●Chlorinated rubber paint●Lubricating grease●Polyester paint●Cosmetics●Primer paint●Waster water treatment4.Incorportions:YH-908YB belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 40%-60% by weight of YH-908YB.It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.5.Recommended Levels:The amount of YH-908YB rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total formulation weight.6.International Countertypes: Bentone®34,Claytone®40NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. The products discussed are sold without warranty, express or implied, including a warranty of merchantability and fitness for use. Purchases will be subject to a separate agreement which will not incorporate this document.