Delivery Time:3-5 days
Certification:CE,FCC,MSDS
Defect Free Aeration Tank Waste Water Storage Tanks Low Freight Cost
What is aeration tank
An aeration tank is a place where a liquid is held in order to increase the amount of air within it . Aeration tanks are widely used in wastewater treatment , with the high oxygen levels increase the speed at which the water is cleaned . There are general two ways to aerate liquid: forcing air through the liquid or forcing liquid through the air , but the aeration tanks are very different between the two types . The water is mixed with biological agents and then aerated . The increased oxygen promotes the growth of the beneficial biological material . That material will consume unwanted waste products held in the water . Finally, the beneficial material will grow due to the increased oxygen and food, which makes it easier to filter from the clean water .
Our advantages
The largest and most professional manufactory in China Tanks are up to NSF-61 and AWWA D-103 standards More than twenty years\' experience Already successfully built more than 2000 tanks worldwide Excellent after -service and professional teamProcess flow
raw steel delivered to the warehouse
Punching
corner cut and edging
rolling of panels
shot blasting
glaze slip adjustment
spray coating
Drying
fired through furnace
quality inspection
packing
Factory Controlled
Center Enamel has developed a quality control system , including
Raw material test :ingredient ,analysis ,impurities test ;
Recipe finalizing small sample test :enamel fluidity test ,chromatic difference analysis ,enamel burning
Experiment ,acid and alkali resistance test ,glossy ,adhesion test etc;
Middle stage product test :magnify experiment simulated operation environment
Destructive testing :impact test ,holiday test ,sliced electric microscope analysis
Reference project
|
Municipal sewage project |
daily treatment 9000T 2 set of hydrolysis reactor Ø15.28×6M 3 sets of contact oxidation tank Ø15.28×4.8M 2 sets of sedimentation tank Ø15.28×3.6M Total volume : 7000CBM,Installation: 12 person , 20 days |
|
2014 Urban sludge treatment project- Kazakhstan |
2 sets of anaerobic tank size: φ17.06×15.6, 3564CBM |
|
Mining waste water in Shanxi province,China |
1 set of hydrolyzation tank Ø16.81×4.8 M 1 set of secondary sedimentation tank: Ø18.33×3.6 M 1 set of sedimentation tank : Ø7.64×4.8 M 2 sets of biological aerated filter : Ø6.11×6 M installation: 10 person 18 days |
|
Brewery wastewater treatment - Cambodia Phnom Penh |
daily waste water treatment : 1000 T 1 set of UASB tank Ø8.4×16.8M, 1 set of Contact Oxidation tank Ø10.70×4.8 M, 2 sets of adjusting tank Ø9.93×4.8 M , 1 set of secondary sedimentation tank Ø7.64×4.8 M |
