Product Details

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

10M / 100M / 1000 M BIDI Single Mode Single Fiber Media Converter SC 1310nm /1550nm 20km

Specifications

Protocols	* IEEE802.3 Ethernet(10Mbps) * IEEE802.1d Building tree protocol * IEEE802.3u Quick Ethernet (100Mbps) * IEEE802.1Q VLAN * IEEE802.1p QOS PRI * IEEE802.3x Full duplex flux control * IEEE 802.3ab 1000Base-TX/FX
Power supply	110VAC or 220VAC
+12VDC
Operation Temp.	0℃~+70℃
Storage Temp	-40℃~+85℃
Relative Humidity	5%~90%(non-condensation)
Shipping weight	0.8kg

Application Scenario

Characteristics

Supports SNMP management (only for SNMP management device), Selectable optical link-loss alarm Selectable four transmitting modes IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-TX and FX Standard Conform to 10Base-T, 100Base-Tx, 1000Base-T and 1000Base-Sx/Lx/Zx specifications Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard UTP port supports 10/100/1000 and Half/Full-Duplex auto-negotiation Store and Forward Switching Mechanism Auto-Cross over for MDI/MDIX in TP port Supports transmission distance up to 20km Support 4K MAC address Support 256K Byte Packet Buffer Supports hot-plug

Introduction

10/100/1000M Media Converter is a kind of Gigabit Ethernet Media Converter with the main function of photo electricity switch over between 1000BASE-TX or 100BASE-TX and 1000BASE-FX. Media converter transmits IP data over fiber, applied in many places where need long distance transmission. Low consumption and high resistance to electromagnetic interference of the optical fiber make the transmitting distance spread from 100m to several decades KM or hundred KM, improve the communication quality as well. And make the server, repeaters, switch, terminal PC connect easily.

LED Indicators

Name	Definition	Specification
RWR	power supply	ON when the power supply is turned on and in normal working status
FDX	Ethernet interface mode	ON, Full duplex
OFF, Half duplex
FXL	optical interface status	Bright when optic fiber cable is connected well, but no data transmission
Blinking when receiving data
TXL	Ethernet interface status	Bright when twisted pair is connected well, but no data transmission
Blinking, when receiving data
1000M	Data rate	ON, 1000M
OFF, 10M or 100M
100M	Data rate	ON, 100M
OFF, 10M or 1000M