1.Description:‍‍‍‍‍‍One part,neutral curing silicone sealant.Excellent adhesion to most building materials without priming,and can be used at all kinds of weather.Sealant becomes elastomer after curing.One part,neutral curing silicone sealant.Excellent adhesion to most building materials without priming,and can be used at all kinds of weather.Sealant becomes elastomer after curing.2.INSTRUCTIONSSurface must be clean and dry. Test applications on the job site are recommended.Some metals, plastics, paints or concrete surfaces require priming with Silicone primers.Mask smooth surfaces to simplify clean-up, Remove immediateIy after tooling sealant. Apply correct primer where required. Use approved backer rod or bond breaker beneath sealant. lnstall sealant to1/8" minimumor3/8" maximum depth,making sure sealant is in good contact with joint surfaces. Place package in caulking gun.Cut off metal band and replace caulking gun nozzle. Tool within20 minutes,NOTE;See Silicone spec Data sheet for detailed unused sealant in dry area at less then27℃(80℉) Use prior to date stated on container.