1. Usage: flat vulcanizing machine is used for curing rope (fabric) conveyor belt. 2. Performance description: 1, PLC, touch screen control enables manual and automatic control. Control can be realized mold, exhaust, temperature, curing time, alarm, mold unloading functions; touch-screen time display hot plate temperature of the heated area. 2, hydraulic cylinder using ZG270-500 material, the plunger with dense texture of chilled alloy cast iron, cast made after the fine grinding; hydraulic cylinder-ring seal in the form of YX. 3, hydraulic automatic hot plate Guobian Top Rail, the role of the four fuel tanks on both sides of the horn under the hot plate at the same time advance and retreat; hot plate at both ends overlap with anti-horn device. 4, hot plate heating zone are provided for each set of conditioning temperature valve, under the control of the PLC to ensure that all heating zone hot plate temperature is uniform. 5, hydraulic system: Use famous brand hydraulic station, PLC control, it can be automated: mold, exhaust, mold unloading. 6, mechanical synchronized balance mechanism: the bottom of the platform there is a unit of synchronization through the shaft at both ends with rack and pinion, to ensure level of the platform lift. 7, mold-oriented devices: both sides of Taiwan in the Xiadian guide with clamping device, box board and platform installation guide, Block, Block oriented processing of slope, slope can be adjusted from the top wire. 8, mold help organizations: mold when in platform movements following four cylinder, forced to pull down the platform to prevent the mold does not stick open pot phenomenon. 3, Model: Produced according to customer requirements Email:tycoonlinda@yeah.net